I had a similar issue on my 2016 Explorer. The Ford Dealer changed the battery and did what they referred to as a "battery reset" to reset all the items. You might want to research and see if you Expedition might need the same thing.
MrSticker said:
I know brake rotors can be made from various materials but aren't most of the standard ones made of cast iron? The better ones are high carbon cast iron (with various other metals in the alloy) .. And don't rust too bad either. Steel would be unusual.
I think pushed hard brake...
Here is some things to think about on rotors. If you take a new rotor and bolt it up to a known good wheel, then put a dial indicator on it and measure the "run out" (warp) as you spin the rotor, it will probably measure less than .002 inches. If you do the same thing with that same rotor after...
I purchased them for a 2010 Ford Expedition and it was totaled Nov 2018, so I pulled them out and put them into the 2013 Expedition. Having said that, I through my folder on the 2010 Expedition before realizing I needed to keep some of the paperwork. I keep kicking myself for that one ever...
I just purchased a 2013 Ford Expedition that had a remote start kit added.
There are a couple of different versions, but the one on my Expedition is a
"Remote Start, One-Button 100 Series - Ford (AW3Z-19G364-A)". You can purchase online for about $230.00 and they are a kit that can be installed...
I have a 2013 Expedition Limited.
There are LED headlights and there are good LED headlights.
My first pair of LED leadlight I purchased garbage. The pattern was bad and everyone flashed their headlights at me and the Ford computer did not like them either. I took them out and put them where...
Changing to LED can be done but you will need to do some research. I have converted 5 cars to LED with success, but the key is understand what the light pattern of the LED replacement bulb you have picked is. There are some good videos on the web about the light pattern of most of the LED major...
Hi,
I am new to this forum. I have a 2013 LTD.
I replaced all the lights with LEDs and now looking for some help with ForScan to get the flashing speed rate back to normal.
I have a Windows 10 laptop and will download the ForScan software. (yea i know Windows 10 is not a good platform)
There...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.