-
-
TXResponder replied to the thread Aftermarket UCA still hitting coil springs.You also may need to reconsider your suspension geometry. You might need more rear lift or less front lift to prevent that level of rub... -
TXResponder replied to the thread Aftermarket UCA still hitting coil springs.Go back to stock or similar. I have moog on one side and carquest premium on the other, and I have ready lift spacers on Monroe quick...
-
TXResponder replied to the thread Why Do You Love It?.I've built my Expy to be the exact vehicle I need and want. I can take it apart and reassemble it in the field easily and with limited...
-
TXResponder replied to the thread Drip in the front can't find source.Coolant smells sweet and is usually green or yellow and sticky. Brake fluid is clear-ish to reddish brown and has a oily feel to it and...
-
TXResponder replied to the thread Drip in the front can't find source.Either smell, taste, or paper-test and report back. Without knowing what it is there is no great answer. It could be coolant, AC...
-
TXResponder replied to the thread 2008 Front and Rear Shocks and Springs.A chisel and mallet is the best way to get those axle seals out, but hit each side alternating left and right, so it comes out straight...
-
TXResponder reacted to ExplorerTom's post in the thread Found my new favorite tie rod tool! with
Haha.
Dollar General has a kit that caught my eye. -
TXResponder replied to the thread Found my new favorite tie rod tool!.Apparently not everything at Dollar General is a dollar, which makes me concerned about the quality if they can't even get the name...
-
TXResponder replied to the thread Found my new favorite tie rod tool!.My theory is that nothing needs replacing unless it's actually giving you issues. Is yours giving you problems?
-
TXResponder replied to the thread Found my new favorite tie rod tool!.Specifically the inner, I forgot to mention. It's a 1 1/2 end on the sleeve of the ball joint.
-
I finally changed the factory tie rods on my 2008 Expy. (Yes, 18 years along the line.) I used a rental tool on the passenger side (that...
-
-
TXResponder replied to the thread 2001 Ford Expedition 5.4 engine high idle speed.Glad you got it fixed! If you ever do end up needing to clean the IACV, use throttle body/carb cleaner or similar. Make sure it's safe...
-
-
Loading…
-
Loading…
