whtbronco's latest activity
-
whtbronco replied to the thread No sound from rear speakers?.If you had radio controls in the rear of the center console the problem could be there. The rear speakers run through there. You'll... -
whtbronco posted the thread Seat covers - real replacement covers in 2nd Gen Ford Expedition Interior.So we have finally worn through the outside edge of the driver seat on our 2004. At 316k miles it's no surprise, even more so...
-
whtbronco reacted to AWAR's post in the thread Removed door handle. How do I get door handle cable stop into the stop retainer? With out breaking the retainer. with
Like.
The inner door handle slips out of the regulator assembly. Look at the handle itself closely. The pin does not come out of the handle... -
whtbronco replied to the thread Looking for the part number for a 2003 ford expedition driver side seat back adjuster handle.Agreed. Great idea.
-
whtbronco replied to the thread Radio Wiring harness and steering wheel controls.I always cut and solder wires and yet I still have occasional incorrect response so it may not be your t-tap. I've always been suspect...
-
whtbronco replied to the thread Radio Wiring harness and steering wheel controls.Check the Crutchfield.com web site. They will likely have an option or 2. For my 2004 I used the Crux SWRFD-60L Wiring Interface for...
-
whtbronco reacted to Cherryriver's post in the thread Bizarre- ABS module mount bolt failed with Like.
It probably would have. But I got impatient and just used what I had on hand to get on the road. I gathered from looking around Ebay...
-
whtbronco replied to the thread Look what came in the mail today!.Isn't that sweet. So much better than a manual on a computer, and the battery doesn't die when you take it to the garage for the day.
-
Maybe one of these will work. 10mm x1.5. Napa part.
-
whtbronco reacted to DZTEDDIE's post in the thread Looking for the part number for a 2003 ford expedition driver side seat back adjuster handle with Like.
Thanks Eddie
-
Thanks everyone, I was able to go harvest most of the bolts at pull a part. Just about have the old manifold out. Running out of time...
-
whtbronco replied to the thread Looking for the part number for a 2003 ford expedition driver side seat back adjuster handle.I spent some time looking for the part # with no luck. That said even if you find the part number it's unlikely you'll a new one...
-
Everything checked out good for continuity. I bought a new O2 sensor, went with the Bosch, and crawled under it. when I went to remove...
-
whtbronco replied to the thread 2005 O2 sensor codes sanity check..Checking the integrity of the wires from connector to connector is a good place to start. Checking the integrity of the PCV tube and...
-
-
whtbronco replied to the thread Navigator ZF5 Manual Swap.Way to persevere. It can be tough to return to a big project after a lengthy delay like your wrist. I sure do miss manual...
