C1095 ABS code

johnboneske · Nov 13, 2013

I have the code C1095 and was wondering if anyone else has had it? Was told it is the Hydraulic pump motor circuit malfunction. I looked it up on the internet and found this:

ABS Controller Repair

Has anyone else had this? Any help would be appreciated!

david_jr · Jun 15, 2018

I have seen threads like this on a lot of different Ford Forums, but it seems no one ever gets an answer. I now have the same problem and both ABS and Traction control lights are on.

johnboneske · Jun 16, 2018

This is an old thread of mine... I do remember having to replace the whole pump/ABS block. I got a good used one from a local LKQ yard for $60, wasn't a very fun job doing it... But completely alleviated the error code and my ABS worked properly after.

johnboneske · Jun 16, 2018

david_jr said:
I have seen threads like this on a lot of different Ford Forums, but it seems no one ever gets an answer. I now have the same problem and both ABS and Traction control lights are on.

this was from my old 97 expedition...

1955moose · Jun 16, 2018

I had a 89 Lincoln mark 7 about 7 years back, that had a check brake light on, along with no power brakes, scary! I also changed out abs unit that I pulled from pick and pull. All worked well after.

Sent from my N9131 using Tapatalk

david_jr · Jun 16, 2018

Thanks for the tips. I suppose there must be a YouTube on that somewhere.

1955moose · Jun 16, 2018

Their usually is. Your not the only one that had this problem. Habbibie one of our regulars, had his abs unit go south. These things usually come in threes, your #2!

Sent from my N9131 using Tapatalk

david_jr · Jun 17, 2018

Does this require changing out the ABS and the HCU? Thanks for the input.

Don Hall · Jun 17, 2018

https://www.yourmechanic.com/articl...lic-pump-motor-circuit-failure-by-parker-hill

1955moose · Jun 18, 2018

David, before you swap out any parts, I'd do the full diagnostic that Don shot to us. It could be something simple. You didn't mention any problems like soft pedal, or pulsating, just the code. Post your findings when you, or the shop finds a solution, it will help others.

Sent from my N9131 using Tapatalk

C1095 ABS code

johnboneske

Full Access Members

david_jr

Active Member

johnboneske

Full Access Members

johnboneske

Full Access Members

1955moose

Full Access Members

david_jr

Active Member

1955moose

Full Access Members

david_jr

Active Member

Don Hall

Full Access Members

1955moose

Full Access Members

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page