07navi
Full Access Members
They both have a 3/4" gap when up (and sometimes 1") but the hinges are clean and well oiled, plus we don't have a rust problem here in California.
Electric running boards don't go all the way up.
- Thread starter 07navi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Kyle Sookhansingh
New Member
Have you checked the connector?
OP
OP
07navi
Full Access Members
What connector?, I just bought this truck and they looked fine when I bought it.
star-art
Full Access Members
The motors contain hall effect sensors that give feedback to the control module which controls deployment. If there are no mechanical issues with the brackets then you need to diagnose the module. From another thread I believe you said you had a Factory Service Manual (FSM). Hope that helps! 
OP
OP
07navi
Full Access Members
Thanks, the brackets are fine and well lubed so I will look into that (sounds complicated and expensive)The motors contain hall effect sensors that give feedback to the control module which controls deployment. If there are no mechanical issues with the brackets then you need to diagnose the module. From another thread I believe you said you had a Factory Service Manual (FSM). Hope that helps!
