Front fan only blows on setting "4"?
- Thread starter Adieu
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mquick5
Full Access Members
Sorry not to familiar with these models, but if speed 4 is high, it's probably the blower motor resistor. I'm sure others will chime in soon.
Sent from my SM-G930T using Tapatalk
Sent from my SM-G930T using Tapatalk
Eric Wheeler
Active Member
Should be a easy fix. Change out the blower resistor under the glove box, with OEM part. Others don't work.
John Dycus
Member
Changed the blower motor connector and the resistor but my blower is stuck on high and will not turn down or off unless you turn the engine off
mrbadwrench
Well-Known Member
The problem may be a bad switch. I would get a wiring diagram and check the circuits with a meter before buying a new switch.
Trainmaster
Old School Member
The stupid switch on even the manual heater has electronic circuitry in it that fries and does stupid things.
You would think they could keep a switch simple?
Get another one at a junk yard or on ebay.
You would think they could keep a switch simple?
Get another one at a junk yard or on ebay.
Similar threads
