Aspen03
Full Access Members
ONR wash and spray wax after work. Rounded up the kids in the Navigator and did some tail gate ice cream at a little local place as the sun set. Not a bad evening!
What did you do to the expy today
- Thread starter cleaningman94
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yesterday actually. 2003XLT Rustbucket BEATER.
I applied FLUID FILM to as many metal tube lines as I could find and access.
.. an ounce of prevention is worth a pound of cure ..
I also sprayed a couple doses of WD40 on the lower steering shaft knuckle.
Not that it needed it but it will preserve it and give longer service life.
I applied FLUID FILM to as many metal tube lines as I could find and access.
.. an ounce of prevention is worth a pound of cure ..
I also sprayed a couple doses of WD40 on the lower steering shaft knuckle.
Not that it needed it but it will preserve it and give longer service life.
Installed Console Vault to my 2015 XLT.
https://www.consolevault.com/ford-expedition-with-sync-system-2009-2011.html
Luckily I called them. The lady there had asked me if I had a fleet vehicle. I'm pretty sure my XLT is a former Rental. She correctly told that the Fleet Expeditions from 2015 actually had 2014 consoles. I sent her some pictures and it was confirmed. So they sent me the 2014 and it fit correctly.
https://www.consolevault.com/ford-expedition-with-sync-system-2009-2011.html
Luckily I called them. The lady there had asked me if I had a fleet vehicle. I'm pretty sure my XLT is a former Rental. She correctly told that the Fleet Expeditions from 2015 actually had 2014 consoles. I sent her some pictures and it was confirmed. So they sent me the 2014 and it fit correctly.
Blksmk
Full Access Members
Washing her today and then putting a for sale sign on her. Found another ford I want/need
ManUpOrShutUp
Full Access Members
I replaced the front driver wheel hub assembly. Unfortunately, I discovered that that wheel also had a stuck caliper, which has destroyed my new rotor and pads. Arghhh!! Not only do I have to order more parts, but I will have to take that caliper off again after just having done it.
ManUpOrShutUp
Full Access Members
Brakes all done yesterday. I don't know how I missed the caliper issue. One of the pistons was clearly stuck and it had to be replaced. I changed the brake fluid while I was at it also. Today she hauled some more gym equipment to earn her keep. 
Blksmk
Full Access Members
Washed her, a guy came over and took her for a spin. Told me he would offer me 500bless then my asking price. So see if he shows up in the morning
Similar threads
Latest posts
-
-
-
-
2004 Rear Trailing Arm Issue? New member a little help please.
- Latest: TheRoosterMMA
-
