2010 XLT AC issues.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rain

New Member
Joined
Sep 23, 2020
Posts
4
Reaction score
2
Location
Florida
I can't find where the accumulator and or the low pressure switch??? I know what it should look like and for some reason I can't locate it...

IMG_7314.PNG
 

Hoffy90

Member
Joined
Jan 5, 2020
Posts
9
Reaction score
3
Location
Oregon
I just replaced all the ac components my 13 EL and I'm pretty sure it's on the line connected to the upper condenser line(just under the radiator support bar). Pretty sure the accumulator is built into the condenser.

Sent from my Pixel 3 XL using Tapatalk
 

07navi

Full Access Members
Joined
Feb 3, 2020
Posts
2,538
Reaction score
593
Location
Mt.Shasta California
Somebody will chime in with the location but it's not built into the rad. I just bought this so IDK where it is
 
OP
OP
Rain

Rain

New Member
Joined
Sep 23, 2020
Posts
4
Reaction score
2
Location
Florida
Got a feeling it might be under the dash and I'm hoping that's not the case. I want to test the low pressure switch and for the life of me can't seem to locate it.
 
OP
OP
Rain

Rain

New Member
Joined
Sep 23, 2020
Posts
4
Reaction score
2
Location
Florida
Thanks, I'll look... I'm thinking driver's side? I was all over the passenger side lines from rad to wall.
 
OP
OP
Rain

Rain

New Member
Joined
Sep 23, 2020
Posts
4
Reaction score
2
Location
Florida
Minor issue here, there... working it back to everything working. Passenger front power window issues. AC blend door actuator issue (bottom one near floor up front). Already replaced top and both in the rear. Added the push bars. Trailer light pigtail needs replacing, I have in garage. Here's a recent photo, still a work in progress.

2010 Expedition XLT.jpg
 
Top