Nascarguy320
Member
Hi new here. I have a 2000 2wd and im looking for a front lift for my truck. What can I use I was going to buy a fabtech lift from a 2000 f150 but not sure if they will work.
2000 Expedition 2wd lift
- Thread starter Nascarguy320
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Nascarguy320
Member
Any help would be great. I just want to put a 3 to 3.5 lift in the front of my truck.
1st_gen_expy
Member
look at trekline motorsports they have a 3.5 inch lift spindles for 1st gens. im currently running their 3.5 spindle lift 1.5 daystar spacers in the front and 2 inch rear daystar lift in the rear
1st_gen_expy
Member
going with lift spindles remeber that most will make the front sit wider then it already is so it will stick out about 1.5-2 inches farther then the rear, to solve this problem i ordered 1.75 bora hub-centric wheel spacers from custom offset
Did you keep the stock height sway bar links in front or go with longer ones or sway bar saddle lowering blocks?
Any bump steer issues with the 5" lift in the front?
Similar threads
Members online
- Tonka
- nationalgallery
- Herby
- morningLumber
- HILLY
- hcodie
- S20Workstation4
- muteferrika
- crazyguy
- Dennis_H
- Fastcar
- Expy Gator
- PharmerBrown
- Hellwig
- 2011EL
- MTB2022
- shane_th_ee
- vinbonifacio
- techdude99
- slow3v
- Chio4
- clamps
- AJ82
- seannieboy71
- leznewmada
- JasonH
- drdstny
- Fireshark
- Logan97
- the3rdday
- BostonAutomations
- rwmorrisonjr
- mreed112
- kspann
- OrlandoExpyOwner