bigdogchrisl
Well-Known Member
Oh, and just by the by, Hamfisted as the nicest set of under8008s I've ever laid eyes on...
PCV Valve & Connector Hose Replacement
- Thread starter Mako825
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Trainmaster
Old School Member
Where'd you find a smoke generator?
bigdogchrisl
Well-Known Member
Almighty jungle site....Amazon
Hamfisted listed link above.
Sent from my SM-N986U using Tapatalk
Hamfisted listed link above.
Sent from my SM-N986U using Tapatalk
Mako825
Full Access Members
Well, part of the bargain for me doing my own small repairs and maintenance items, is that I buy the tools needed for the job with the money I save. Then I have the tools for the next go around. I don't have a pair of pliers for the 2 Constant Tension clamps on this PVC hose assembly. I've used my small vise-grip locking pliers in the past for jobs like this. But, they aren't great for tight spaces. I may re-post this as a general forum question, but was wondering if anyone has any suggestions for the best brand of pair of pliers to buy (or ones to avoid buying) for these Constant Tension clamps?
bigdogchrisl
Well-Known Member
I do the same. I recently bought a whole set of hose clamp pliers from Wish for $29, in it is a set of locking pliers specifically for these. Ill try and find a link.
Sent from my SM-N986U using Tapatalk
Sent from my SM-N986U using Tapatalk
Trainmaster
Old School Member
Of course I avoid Chinese tools, but in a pinch I bought a pair of hose clamp locking pliers from China at Advance Auto Parts. It's better than nothing, but I often reach for needle nose pliers instead as the Chinese tool is frustrating to use and often fails to lock properly. Buy the best stuff you can afford. If it says CHINA on it, you'll curse it every time you try to use it.
Mako825
Full Access Members
Good Advice Trainmaster!
I ended up finding a pair of SE Tools 860G pliers (Made in the U.S.A) with a locking clasp for under $15 on Amazon.
https://www.amazon.com/gp/product/B005MVB5XS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
They arrived today and appear to be well-suited for the job. You'll need something beefier for a radiator hose, but for these small and medium-sized hoses (like on the PVC assembly), they will do fine.
bigdogchrisl
Well-Known Member
Yup, they are a little more than passable. Certainly made the case for spending $45 as I also have 2 VW's that have those damn clamps everywhere.
I pinched my finger one too many times with pliers, even the ones I grooved out to hold better. Stupid blood blisters hurt....
Sent from my SM-N986U using Tapatalk
I pinched my finger one too many times with pliers, even the ones I grooved out to hold better. Stupid blood blisters hurt....
Sent from my SM-N986U using Tapatalk
bigdogchrisl
Well-Known Member
I agree, like 90% of the time - except more and more it doesn't matter what it says on it, it still came from the same place...only difference is the "Made in Merica" sticker was made in China too . .
Sent from my SM-N986U using Tapatalk
Ellison Brown III
Full Access Members
That’s what I ordered for my ‘04 Eddie Bauer. Tried to find something at an auto part store... unfortunately, they don’t carry it. Didn’t have time to research an alternate resource (visited my daughter at college to repair), so I ended up grabbing from Ford for approximately $110!!!
