Fog Light Wiring from the switch

Can anyone tell me what color wire goes from the headlight switch to the fog lights?

I had a new headlight switch installed (by a dealer) and they did not hook up the fog lights. I didn't know that they were not hooked up, until one night when it was very foggy.

Thanks guys and gals!

Hi there,
Don't assume that they didn't hook it up at the switch. Start with checking the fuse related to it and then the light assembly itself. You can use a multi-meter and see if you get voltage at the connector to the light assembly.
I also added the wiring map if you still require the wire colors.

Does the switch knob pull out, like how you normally turn the fog lights on ? But you get no fog lights? Because there are two headlight switch part numbers available. One WITH fog lights, and one WITHOUT foglights. Just wondering if they installed the correct part number switch. There's no separate wiring plug for the foglights / headlights. It's all one plug. So they either plugged it in and you have headlights/foglights, or you have neither. The switch WITH foglights just has some extra pins in the big plug (for the foglights...), whereas the one without foglights doesn't have that second row of pins in the big plug.
Check fuse #17 , and the foglamp relay too, and that the high beams are not on. The white/black wire run over to the fusebox and tell the foglights to come on via the foglight relay.



Switch WITH foglights ....






Switch WITHOUT foglights....






Foglamp Relay - Top Middle slot in fusebox....

I have the right switch.

The lights work when power is applies to their wires close to the light.

The connector to the BACK of the light switch has a whole bunch of colored wires. I just need to know which color of wire connects to the fog lights, so I can track down where the problem is.

Thanks