Fuel shut off

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mari

New Member
Joined
Apr 1, 2021
Posts
4
Reaction score
0
Location
Milwaukee
I was I was looking to see if the fuel shut off switch was ok and I noticed that this white connector wasn’t plugged into anything I I see the dark green/yellow witch goes all the was to the fuel pump, wire connected to the connector I don’t know what it is is there something supposed to be plugged into it my truck cranks but doesn’t start

E4D093D9-30EE-45BA-8094-2806FBF29BC8.jpeg
 
OP
OP
M

Mari

New Member
Joined
Apr 1, 2021
Posts
4
Reaction score
0
Location
Milwaukee
O it’s a Eddie Bauer and the power windows back there have a connector plugged in to it already so this white connector has that dg/ye wire witch comes from the cbj to the fuel shut off to the fuel pump does anyone have any 05 expy wiring diagrams for the wiring harness
 

riphip

Full Access Members
Joined
Nov 6, 2018
Posts
641
Reaction score
189
Location
Memphis, TN.
May just be an unused connection as on a Navigator, etc. Same harness.
For not starting, it may be your fuel pump driver module (FPDM) since you are where salt, etc is used on the roads.


https://www.rockauto.com/en/catalog...33355,fuel+&+air,fuel+pump+drive+module,14756

The metals that come in contact with the frame corrode. Wire brush area when replacing.
You may be able to clean the area and it will work again also. Good luck :happy107::happy107:
 

GAINMOB

Supporting Member
Supporting Member
Joined
May 19, 2010
Posts
14,561
Reaction score
888
Location
Hampton, VA
its the harness for the subwoofer amp...i removed mine...lol
 
Top