2021 XLT FX4 Halogens - Help!
- Thread starter ViperVette
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
maharoof
New Member
can you share the brand and model of bulb you purchased, will be a great help
I got this brand for hi's, lows, and fogs. So far so good.
AUXITO H8/H9/H11 LED Light Bulbs, 400% Brighter, Mini Size, 80W 16,000LM Per Pair, CanBus Ready, Beam Adjustable Lamp Conversion Kit, 6500K White, Pack of 2 https://smile.amazon.com/dp/B07WD6G...abc_0CW907FSMMSXJKD4F7ZP?_encoding=UTF8&psc=1
OP
OP
ViperVette
Well-Known Member
My Allas just arrived and I’ll be installing them this evening. I will get some before/after pics and let you guys know what my experience was.
Hoping it is as plug and play as others have said but since mine is a ‘21 you just never know?
Hoping it is as plug and play as others have said but since mine is a ‘21 you just never know?
Last edited:
@ViperVette i installed the same set back in Sep 2020 to include Alla fog and park/front turn signals switchbacks. To date no issues. Love them. In the rear I went with Sylvania LED taillight bulbs since they are designed to work best in a halogen reflector housing.
www.expeditionforum.com
Alla Lighting for 2019 Expy XLT
Heres my Alla lighting order as well (installing this Wednesday). Switchback turn signals: Post light install Left turn signal on
www.expeditionforum.com
Last edited:
I used Sylvania led lights for all the rear end lights (license plate, reverse, running and signals)
www.expeditionforum.com
Alla Lighting for 2019 Expy XLT
I'm looking to replace my stock low beam halogen on my 2019 XLT with LED bulbs and looking at the Alla Lighting FL-BH 9005 HB3 (it's in a red color housing - they have several models so it's confusing). Does anyone have these and can you tell me if you like them and how did it fit (one reviewer...
www.expeditionforum.com
Last edited:
OP
OP
ViperVette
Well-Known Member
Having not done this before, I’m guessing the wiring harnesses included in the box go between the new bulb and the vehicle plug? I was thinking the plug and play was simply unplug the halogen bulb and plug in the LED bulb?
What do I do with that extra harness etc?
Does it go inside the dust cover? The instructions are very minimalistic that came in the box.
What do I do with that extra harness etc?
Does it go inside the dust cover? The instructions are very minimalistic that came in the box.
Last edited:
OP
OP
ViperVette
Well-Known Member
The harnesses came connected to each bulb on my set. But yes. Connect bulb, then harness, then truck. You might have to flip the plug if it doesn’t turn on. Also I just threw the harnesses in the housing behind the dust cover and let them hang. Could probably tape them or zip tie to something but it’s tight up in there. I haven’t noticed any noise or problems from them hanging.
Similar threads
Staff online
-
Yupster DogSuper Moderator -
GriffinAdministrator