Anthony DeVor
Full Access Members
I bought the dorman aftermarket lamps but am now having an issue in my BCM. I have a 3rd Gen Expy (2017) and my Bdycm is throwing a couple codes and shows that the circuit is shorted to ground - it is only putting out 1.2v on the puddle lamp wire. So beware of the aftermarket puddle lamps. Granted the puddle lamps still works but the Bdycm puddle lamp circuit died so I don't know if it is an internal issue or if it is the puddle lamps causing an issue.
I will post the codes later when I have time but from memory - puddle lamp circuit short to ground, driver disabled, and some *3000 code (I don't remember what letter it was from memory - I think it was a U).
Any help or advice would be appreciated. I do have codes for a couple other issues like a key switch short to ground code and my humidity sensor is shorted to ground it says. But everything else besides the puddle lamps work fine.
I will post the codes later when I have time but from memory - puddle lamp circuit short to ground, driver disabled, and some *3000 code (I don't remember what letter it was from memory - I think it was a U).
Any help or advice would be appreciated. I do have codes for a couple other issues like a key switch short to ground code and my humidity sensor is shorted to ground it says. But everything else besides the puddle lamps work fine.
