maxlim2022
Full Access Members
now, thats crazy! sorry about your misfortune. Do keep up appraised - consider starting a thread to report on this so others can chime in as needed.
2022 Expedition - Schedule for production ?
- Thread starter carnevallemarcelo
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GGecko311
Active Member
Oh good point! They are looking at it Monday and I'll create a thread in the appropriate section when we figure out whats going on with it. Hopefully whatever it is, doesnt happen to too many out there.
Checked the ordertrack site Thursday and finally switched to In Transit after order placed on 10/26. Never got an email from Ford though. Their tracker shows shipped, but no date. I did call Marketing and they confirmed it’s shipped with an ETA to dealership of 7/21 (I’ll believe it when I see it). Can’t figure out why no date on the Ford site or no email though. I’ve gotten status updates from them previously. Anyway, this will all be an afterthought when I drive it home.
rob4092xx
Full Access Members
I purchased 3 days ago and my First Responder discount was only $500. How did you get $1,000 discount?
twinturbodude7
Well-Known Member
I've had the same experience with my dealership. The guy I'm working with is nice, but I have to pry information out of him. And he never reaches out to me, it's vice-versa. Why am I paying the dealership? Just so they can do a NC inspection and put their dealership sticker on the tailgate?
I'm going to be really irritated if they don't stick to our agreed deal of 3% below invoice.
This process has really shown how little value the dealership is providing in this transaction. I've done 99% of the work.
I don't know. That's what they gave me. I didn't argue. When I called marketing two weeks ago they told me I had another offer that expires July 5. I told them I ordered back in November and he said the dealership can still accept it and Ford will pay it. So that was the other $1000
Last edited:
Almost there! Driving home on Saturday afternoon past the dealership and I saw an Expedition Timberline sitting there off to the side so I pulled in. Upon closer inspection, its ours! It was sitting with a couple other new unprepped vehicles so I'm guessing it came in earlier Saturday, the tracker didn't show it was at the dealer until I checked it for the heck of it this morning. I didn't think it had shipped yet as someone else had said the tracker is marked shipped with no date on it, but even now where it shows its at the dealership there's still no date on the tracker under shipped. I'll bug my salesman this afternoon if he doesn't call me first about picking it up, couldn't do it today anyhow.
The green color looks almost grey from some angles. Thought it was grey at first driving past until I got closer.
The green color looks almost grey from some angles. Thought it was grey at first driving past until I got closer.
Lightning8U
Member
Unfortunately, my delivery date was again pushed out and further delayed.
rallyhard
Active Member
Today I cancelled my special order from 2/28 and pulled the trigger on an almost identically optioned Timberline that’s on its way to another dealer. Only differences are it doesn’t have the tranny skid plate or the engine block heater. They changed their mind and accepted my x-plan, so I couldn’t help but take it.
balthisar
Full Access Members
I was frustrated yesterday when my ETA's changed from last week to July 27th through August 2, but today, I'm actually seeing that my Platinum has shipped. It looks like it's still on KTP's site, but at least it's in control of the trucking company finally.
Is a custom, non-state-issued plate legal? And, there are no specifications for how it looks? Or what it's made from? Seems like something I'd be able to 3D print for a few bucks rather than a couple hundred of 'em. They'd be one of various plastics, but could look like anything.
Is a custom, non-state-issued plate legal? And, there are no specifications for how it looks? Or what it's made from? Seems like something I'd be able to 3D print for a few bucks rather than a couple hundred of 'em. They'd be one of various plastics, but could look like anything.
