Seatbelt Reminder disable procedure not working on '22

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
T

texevora

Well-Known Member
Joined
Nov 30, 2017
Posts
74
Reaction score
36
Location
DFW
Thank Ross583. His procedure is he one that worked (at least for me)
 

Overtow

Well-Known Member
Joined
Jun 4, 2018
Posts
53
Reaction score
64
Location
CLEVELAND
What he wrote up did not work on my '18; What you wrote up in the original quote from the manual worked like a charm. Thanks to Ross583 too though!
 

TRex99

New Member
Joined
Oct 22, 2022
Posts
2
Reaction score
0
Location
Salt Lake City
So the procedure from Ross583 will work on the '22 Expedition without waiting for the seatbelt light to go off? I still haven't been able to get it to work.
 

MarineMike

New Member
Joined
Mar 22, 2023
Posts
1
Reaction score
1
Location
California
For those of you who are still having trouble because your seat belt light is not going off in Step 2, stop waiting for the light to go off, just buckle and buckle your safety belt three times. Then it should flash, buckle and unbuckle one more time and it should disable it. Worked on my 2023 Expedition after much frustration waiting for that damn light to go off
 

Stsysar

Well-Known Member
Joined
Feb 5, 2023
Posts
54
Reaction score
19
Location
Florida
Thank you. Finally worked for me too. It only got rid of the chime. I was hoping to get rid of the whole notification screen, but at least it is not ringing anymore....
 

corvin

Member
Joined
Mar 19, 2019
Posts
15
Reaction score
6
Location
WA
Ok I got it to work here the instructions I used.

1.
Before starting the procedure, make sure your parking brake is on.
2. Get inside of the driver's seat and close the door.

3. Turn the ignition to ON but not start (key position 2, or press push to start button
without your foot on the brake if you have a push to start button).

3. Wait 5 seconds, then buckle and unbuckle the seatbelt 3 times with a 1 second pause
between each buckle. Wait 4 seconds, then buckle and unbuckle again. The orange/red
seatbelt warning light should flash a couple times indicating that the procedure worked
and was completed successfully.

5. Voila, if that didn't work, try repeating the procedure with the parking brake OFF.
Perfection! Worked like a charm on my 2024 Expy
 

NevadaGeo

Full Access Members
Joined
Mar 12, 2017
Posts
321
Reaction score
163
Location
Spring Creek, Nevada (NE Nevada)
Thank you for this information. It worked!! Both front row seats in my new 2023 Expy. Owners manual is very misleading and frustrating. It took me over an hour of frustration clicking and unclicking my seatbelt before I finally took to the forum and found the true and righteous path. I wear seatbelts religiously on highway, but nice to be rid of the bing bing bing bing bing bing bing bing bing.....
 
Top