Honestly I don’t know the name of it. I just asked for gloss black vinyl and this is what they ordered. I kind of think I could have done a better job myself but until I find an actual wrap company in my area this will have to do. It took them about 4 hours (apparently they ran into problems, it was only supposed to take about 1.5 hours). It cost $130 to do the front and back. Materials were about $80.
What Have You Done to Your 4th Gen This Week?
- Thread starter MATT0404
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GixxerJasen
Full Access Members
Oil change and installed a ValveoMax. Kinda actually looking forward to the next oil change.
zak99b5
Full Access Members
I bought two replacement ignition coils from 1Aauto to replace the stockers where the retaining tabs snapped off when I changed the spark plugs.
First drive afterward, and the engine soon started misfiring, flashing MIL. Got a P0302 code—one of the replaced coils.
Reused the old Ford coil for now, and ordered two new replacement, this time genuine Ford.
First drive afterward, and the engine soon started misfiring, flashing MIL. Got a P0302 code—one of the replaced coils.
Reused the old Ford coil for now, and ordered two new replacement, this time genuine Ford.
zak99b5
Full Access Members
Oh—also replaced the factory lug nuts with one-piece nuts. None of the factory were bad yet, but we all know how they end up.
FridgeRover
Member
We bought (and drove home) in our 22 XLT in star white with max tow on Saturday, then took it for errands and lunch on Sunday. Really happy with it, and found 90% of what we wanted at a little under MSRP so we took it.
Mr Nando also approves of his new ride, and really likes the large center console compartment
Mr Nando also approves of his new ride, and really likes the large center console compartment
What one piece nuts did you get? Can you post the link. Thanks
SyndicateZ
Full Access Members
Today - We removed both turbos (because i hated the rattle), re-routed the exhaust to a custom fabricated 2.5" catted h-pipe and custom made a dual exhaust with 3" dual tips. We also installed a ford racing supercharger to account for the power we had lost from the turbo delete. getting it dyno tuned tomorrow. we expect about 500hp after getting the computer right.
There a couple of threads about them. According to another member who called Gorilla the 61148FS is the correct replacement from them. I just bought a set from these guys in TX. They shipped same day and they are authorized Gorilla dealer. They also have them in black.
Chrome Lug Nuts Factory 14mm X 1.5 6-Lug 24pk Acorn Bulge Gorilla 61148FS-24
Find Gorilla 61148FS-24 Acorn bulge nuts 14mmx1. 5 - 13/16 21mm hex - bag of 24 These lug nuts are for use as a replacement for the bad factory lug nuts from Ford that come apart. ... For Use With Oem Alloy Wheels Which Require Large Chamfer Seat These Do Not Work With The Steel Wheels...
3.5 Wastegate rattle fixed! - Ford F150 Forum - Community of Ford Truck Fans
2015 - 2020 Ford F150 - 3.5 Wastegate rattle fixed! - To justanengineer ...THANK YOU!!! This really works! Adding a spring from the wastegate linkage to an anchor point on the turbo, the light spring pressure keeps the linkage from chattering. This is the Lowes spring and part number he posted...
www.f150forum.com
I did this on mine and it worked. I have no rattle at all now. Springs were about $5-6 for 2. Took me a while to figure out how to get to the turbos without having to lift the truck, or remove wheels. I ended up taking off the engine cover and went through the top of the engine bay. Took about 10 mins once I figured that out.
zak99b5
Full Access Members
From my thread about Gorilla spline nuts not being the right fit:
On Amazon I found Zoffi black forged one-piece lug nuts. They claim to fit my vehicle (large acorn seat), and have a diagram with the proper measurements (incuding the proper 21mm hex size), and they were $43 for 24.
Similar threads
