One Touch Windows Don't Work When Cold

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BrianDA

Member
Joined
Dec 8, 2022
Posts
12
Reaction score
9
Location
Georgia, United States
Anyone having problem with front D&P windows one touch not working of below about 40F? Almost like the seal is too tight? Sometimes the driver's window will stop about 3/4" from the sill even if it's about 60F. Other times it works fine. Only 6000 miles, maybe the seals need to "stretch in"?
 

wakeboarder

Full Access Members
Joined
Nov 16, 2019
Posts
757
Reaction score
431
Location
Fort Lauderdale, FL
I think there is a calibration procedure for the window motors. I seem to remember having to do it after I installed my AVS window shades. I would perform it when it is cold out.
 

m3olsen

Full Access Members
Joined
Jun 8, 2018
Posts
261
Reaction score
88
Location
CNY
Found a couple different methods online. Tried one. Bring on the cold!

Brian,
Which method did you use? I'm having a similar issue when it gets really cold.

Thanks.

@BrianDA I'm curious too. I don't roll down my windows often and realized yesterday my driver window faults out when going up and kicks the window back down. I have to coax it through the last inch of rise to get it to close. I'm sure it worked fine back in the Fall.
 
Top