Is only labor and gaskets, etc small parts if not. Parts pricing, unlike quality, is not going to get cheaper. You are not depending on it at...
On my '04, PCV didn't want to come out easy & needed a little persuasion. I did the same and got the assembly (tho different) from rockauto.com...
Year? Probably integrated with fuel pump.
What year Expy? Sway bar & stabilizer bushings would be where I would look first. Otherwise, timing chain guide related.
Check www.nexttire.com for pricing & tire models. Free shipping and 0 tax for my state. Out of Las Vegas, Nv I think. Got delivered in 2 days...
https://www.expeditionforum.com/threads/6r75-replacement.40207/page-4#post-391573...
Didn't state mileage. Try a fluid change 1st
May need to take it to a shop that knows what they are looking at to match. No slamming intended.
First: what year, trim, etc, etc? Not much info to go by here. Second: Do you own a tape measure, ruler, etc? You can measure the size on the...
May need to check out battery cables (clean at the posts) or battery age/condition
That's right!! Just gives you 2 more tires that want to pull/spin. Gotta top sometime :pokeowned:
Turn your right overhead control back slowly from the red and it will probably stop. Still get air flow from rear. Is what I do for now. Do not...
Not laughing too hard, 3-14" expected for my area on the way. I remember in '68, we were building igloos with 18" overnight snow. At least at my...
:rockit:You can always go the other route if necessary, you now know the drill.:smiley-face-popcorn
Offer him $4500. If body & underbody is nice, is worth a new tranny w/upgrades. 159k will be looking at timing parts before long but not bad...
For all the $$ and time you have spent, you could have a smoke tester (Hamfisted said: Smoke tester, so you can see what line(s) are actually...
Hope you get it dry soon. :happy107:
Hopefully you can get the old bearing race off the spindle w/o any damage to the spindle. Check the caliper for damage and brake pads.
'08 F250 Owner said not very until it broke the casing & oil was pouring out. Oil light did come on before it quit. Chains and guides were gone...
You could possibly have a broken pump that halfway works until it don't. Seen before [IMG]
Nice Deal!! You will be a Welcome member and be very sought after with those skills. The Forscan knowledge for the older trucks is very welcome....
Put the other sparkplugs back in (if they are out) because the air addition may force the piston down & you want it in the highest position. But...
May be able to use a cap head bolt with nylok nut to fit in there tight as a replacement. Use a fine thread if possible. You do not want the...
Since it did not drop out of the valve guide, rotate the engine by the crank bolt SLOWLY until the valve is all the way up in the valve guide....
Separate names with a comma.
