Search results

  1. mrford60

    2007 Expedition - Engine Stalls for a minute or so

    i would try temporary to put a fuel presure guage on it, before just replacing the pump. how long has it been sence you put a fuel filter on it?
  2. mrford60

    Power seat not working

    take a small hammer and tap on the motors under the seat some times they stick, if not the switch may have gone bad
  3. mrford60

    Question About The Leveling Kits Available For 3rd Gen Expys

    thank you i am going to hopefully order them this week, providing the kids dont eat up my extra money LOL.
  4. mrford60

    Question About The Leveling Kits Available For 3rd Gen Expys

    i can relate about the play money and kids, thanks i plan to do the lift. i like the way yours looks with the extra clearance.
  5. mrford60

    Question About The Leveling Kits Available For 3rd Gen Expys

    Hey Dib52 how is the ride with the lift? any different and what size tires do you have? Thanks
  6. mrford60

    replace radiator support

    just make sure that everything is square when you put the new support back on. X mesure across the front before you remove the support and mesure again when you put it back on. if its not square now you man need to have the front pulled first.
  7. mrford60

    Random Electrical Issues following Car Wash

    it sounds like a gem module problem, disconect the battery take out the module dry it out and reinstall it and see if the problems go away. if not the water may have shorted it out.
  8. mrford60

    What is this wiring connector?

    on my 07 back a little further on the 4 wire plug is the trailer brake wires taped to that harness, i think there is 2 wires there, that will give you 6 wires. you can cut off the 4 prong end and get an aftermarket 7 prong end and wire it on. the 7th wire is for a hot wire, i think you would...
  9. mrford60

    two 3 car pile ups both involving expys!

    good to see the expeditions wernt at fault
  10. mrford60

    Seat belt not retracting very well

    try pulling it all the way out to see if it has a twist in it. sometimes that will hinder the way it retracts, and wipe it off as it goes back in. if not you should replace it.
  11. mrford60

    Stalling on acceleration after stopping.

    i guess that you dont have a check engine light on, even tho your maf looks clean if you run a air filter that is oiled (resuable) the oil from that can coat the little wire in the meter and cause problems. there is a spray cleaner for that. also try cleaning out around your throttle blade with...
  12. mrford60

    03 4.6l expedition idle speed

    clean or replace the idle air motor on the throttle body
  13. mrford60

    2 Shredded serpentine belts within 20 miles

    if the ac compressor had locked up it would have stalled the engine or melted the belt, sence it it shreaded the belt it sounds like something is out if alignement and ripping the belt. A customer of mine had a power steering pump run out of fluid and lock up and stalled the engine, we thought...
  14. mrford60

    Update on 275/70/18 Duratracs with no lift

    thanks for the post, i was wondering how big i could go with tires.
  15. mrford60

    copy of window sticker

    toyman try to hit the refresh button. it has happened to me now and then.
  16. mrford60

    got my ass kicked by my travel trailer, need some advise

    towing a sway control would help alot and also tires with a stiffer side wall will help alot. i know that is pricy but it will help.
  17. mrford60

    copy of window sticker

    if anyone wants to print a copy of any ford window sticker 2007 or newer click on this link and enter your vin. it can be really helpful. http://researchmaniacs.com/VIN-Number-Lookup/WindowSticker/Ford.html
  18. mrford60

    new owner new member

    Hi, just bought a 2007 Expedition 54k miles, leather, no pictures yet.
Top