Search results

  1. G

    Rear driveshaft's centering ball 4WD Expy

    do you mean the threads inside the output yolk?
  2. G

    Very High Idling?

    well the TPS failure is intermittant so I would just have it replaced. It has the same internals of a Volume knob on your stereo but sees alot more action with your right foot always being on and off the throttle.
  3. G

    Very High Idling?

    dude.... your local autozone has a TPS sensor... it is very easy to replace yourself. It is mounted on the side of the throttle body.
  4. G

    Very High Idling?

    well before they start pulling parts have them check the TPS sensor..... Mechanics like to "diagnose everything" and charge you more..... Matt R
  5. G

    Very High Idling?

    HMMM.... is it throwing any codes? It sounds like your TPS (Throttle Position Sensor) may be to blame for both issues. Matt R
  6. G

    Rear driveshaft's centering ball 4WD Expy

    send pic again or post a link to it somewhere like photobucket.... it didn't show up...
  7. G

    Merry Christmas!!

    Well this country was founded "Under God" and stuff we commonly practice.... PC is for Morons...LOL Hey I have something you might all like: The following is the 2007 winning entry from an annual contest at Texas A&M University calling for the most appropriate definition of a contemporary...
  8. G

    grinding/clanking noise when truck is in reverse

    is it constant while traveling in reverse?
  9. G

    Sniper Tune

    Sniper sells the Special Forces package which comes with tuning software and the ability to tune 2 vehicles. this package is usually around 400 dollars. Custom tunes are extra and take advantage of more parameters than what is available in the SF. Custom tunes are an additional 50-75 dollars...
  10. G

    Scangauge II

    I'm pretty sure the 5r110 does on the HD trucks, but i guess check with your dealer if the trans temp can be accessed via the CAN Bus..... Matt R
  11. G

    Sniper Tune

    Yes, have the ability now to do tunes for the 04 with the same great results as the 03 without any "trickery". Much improved shifting and always in the right gear so you will have mileage and power gains with regular fuel and bigger gains on premium.
  12. G

    Vibration and MPG question

    Yeah, but the center of your tires wear faster with over inflation possibly really cutting the life out of the treadwear..... Again, kind of the half dozen and 6 in the other... Matt R
  13. G

    Factory intake..........

    you could cut a piece of plywood to fit in the old hole then let the pilot bit drill into that first...... Matt R
  14. G

    Scangauge II

    I have one..... The trans temp will only show if you have a sensor in the trans. The new 5 speed probably does but the older 4 speeds do not. Matt R
  15. G

    Factory intake..........

    The air filter and Maf are in the center section on the 3V trucks. Man I would just cut the hole out bigger for the full size pipe into the fender on that one....LOL Matt R
  16. G

    Custom Tuning

    No offense taken.... There are several options starting at $375 for a single vehicle with two files (one 87 and one 93 octane). Matt R
  17. G

    Nedd some help diagnosing a new problem!!!

    that really sounds like the ignition switch but who knows on these computer controlled trucks.... it could even be a wire in the harness crossing to another..... Matt R
  18. G

    Custom Tuning

    100 dollars? Where? And you only need the computer to load tunes off the internet or produce your own, the box works by itself once the tunes are loaded on it. I also address much more than WOT power which nobody else really touches. Matt R
  19. G

    Custom Tuning

    Well alot of people have been asking about custom tuning but nobody seems to want to try any.........:nopity: People running custom Sniper tunes speak up about your level of satisfaction with the product. Matt R
  20. G

    Yet Another Newbie

    intake, exhaust, and tuning upgrades will definitely help....
  21. G

    Nitto Terra Grappler Tires

    do you have an updated pic with them on your truck?
  22. G

    K & N

    I am running a modified powerdyne but I had to build my own brackets and machine my harmonic balancer to accept the extra pulley. nobody makes kits for the 03 other than Allen Engine Development. also it looks like most companies don't offer kits for the 2-valve anymore since sales have...
  23. G

    cabin filter

    I think there is a kit to retrofit available from ford.....
  24. G

    Dash Comp??? Switch

    So if you replace the cluster and add the buttons you will get all of the information properly? Matt R
  25. G

    K & N

    IMO just get the replacement filter element and keep the stock airbox assembly. You should replace the piece that goes from the airbox to the fender with something like a black gear lube bottle half... you'll see why if you pull it out! Then a good tune and maybe replacing the muffler would...

Latest posts

Members online

Total: 2,754 (members: 11, guests: 2,743)

Forum statistics

Threads
57,015
Posts
535,894
Members
54,710
Latest member
Smile2013

Share this page

Top