Search results

  1. G

    low end torque

    I was referring to the outer diameter of the pipe. 2.5 inch pipe is the outside dimensions. My 03 was 2.75 OD on the tailpipe. Matt R
  2. G

    evap. problems in '99 5.4?

    Hmmmm there is a valve that puts vacuum into the evap system. if it malfunctions it could collapse the tank. Is your tank plastic? Matt R
  3. G

    low end torque

    the flowmaster will give you good low end because it will give you just a bit of backpressure. What size is your stock pipe? 2.5 is smaller than stock isn't it?
  4. G

    Which Combination?

    Well for 5-6 pounds of boost the ported m90 (latest generation) works really well because it will build boost sooner than the lightning unit because of less total clerance between the rotors. The allen kit will work really well with the stock converter and give instant 5 lbs of boost. This...
  5. G

    Slight engine hesitation W/Video of problem

    I can't really tell what is going on, I saw the rpms drop but they didn't come back up in the video. It could also be the torque converter trying to lockup at WOT which happens in some calibrations. Matt R
  6. G

    loss of power when really hot

    The cooling failsafe mode turns off cylinders and air cools the engine in the event of overheating. You would definitely know if this was going on..... What is being experienced is the timing being retarded due to air intake temperature....... This is less pronounced with a higher octane...
  7. G

    Fadding trim

    Now that is something I have never thought of..... pretty cool! So do you use crunchy for heavily oxidized finishes like a rubbing compound?........LOL I also was looking for a way to have lunch while detailing the car so I will buff mine off with some wonderbread!:D Nice tip with nice...
  8. G

    low end torque

    Which cat back are you planning on going with? I put on a magnaflow muffler with the stock pipe and then put on a 3 inch pipe later and the low end and part throttle was better with just the better muffler on the stock 2.75" pipe. Matt R
  9. G

    98 Expy Shifting Question

    yes, but none of the aftermarket canned reflash devices you buy address this, they just tune for the best power at WOT..... There are some custom tuners out there that can address this. PM me if interested.
  10. G

    Transmission Issue - I Think

    see if your exhaust bracket rubbers are worn or you have any of the exhaust touching the frame or body. My exhaust vibrates really bad at 2000 rpms and moderate throttle and i had a bad exhaust hanger and it sounded like someone was showering the floorboards with rocks..... Matt R
  11. G

    loss of power when really hot

    depending on your factory calibration it may be pulling alot of timing to keep it from pinging when the air temperature gets really hot.... this will kill the power.... glad I've only seen 105 degrees here in TX.....LOL Matt R
  12. G

    Lets talk Noise

    The question is how many cats are on it and where are the rear oxygen sensors? anything behind the rear oxygen sensors isn't being monitored by the computer and is just there to scrub any remaining polutants. Of course you are a rancher and are concerned with setting the meadow on fire...
  13. G

    98 Expy Shifting Question

    this can be fixed with a custom tune.... you have noticed the same thing that seems to plague all of the trucks. It makes a big difference when 3rd gear is held a little longer at part throttle. Matt R
  14. G

    Tires and MPG

    Yeah, but don't make the mistake I did and try load range c tires that you can't put more than 35 psi in. I guess the compromise would be the D range tires.... i don't know the 03 and newer ones ride so nice I don't know if you would even notice the rougher ride....
  15. G

    Tires and MPG

    I agree with Elvato... the more highway a tire (fewer tread voids) the less rolling resistance. Also make sure you get a load range E or better tire if possible so you can run lots of air pressure which also reduces rolling resistance.... Matt R
  16. G

    weird winding sound...

    it could actually be your power steering pump too. Get it flushed and filled with good fluid. Mine made noise because someone put ATF in it....... Matt R
  17. G

    Aftermarket Y-Pipe

    don't go crazy with the cams.... comp's smallest ones would even be a bit much for these heavy trucks.... Crane and crower make some nice modular cams that won't kill the bottom end. Matt R
  18. G

    bad compression?

    we need a better description.... take a video and post it to youtube or something.... Matt R
  19. G

    Hi from New York City

    Isn't there something about "Rain or Shine" in the postal contract? LOL Matt R
  20. G

    My 2004 E/B 20"

    A cold air kit and cat-back exhaust are the first mods i would do. The stock exhaust manifolds on these trucks are pretty good compared to the older trucks. A good tune works wonders too.. Matt R
  21. G

    Hi from New York City

    Nice truck Paisan.... is yours 4x4? Is it easy to get around where you are in the winter? When I lived in the Burbs of Chicago (when I was working for Motorola) the 4x4 was a lifesaver. they took forever to plow my road sometimes. The fun thing was doing 4 wheels drifts down the street since...
  22. G

    chips/programmers/tuners

    Breezy.... Make sure if the kit included different (bigger) injectors that the truck isn't driven one bit without reprogramming the PCM. I have seen the cataylitic converters ruined in less than a mile when someone put bigger injectors on without re-tuning..... Matt R
  23. G

    Dials going nuts at certain road intersection

    Secret Goverment Experiment! Man that is weird.... There isn't a radio station broadcasting from there or anything is there?
  24. G

    AC Freezing

    UPDATE Well I tested the AC system on mine over the weekend and noticed some interesting things. The sysetm will not turn off the compressor even at very low low-side pressures because it uses only expansion valves and does not use low-pressure shut-offs to regulate the temperature. I...
Top