Sounds simple enough, but I could certainly be missing something...
I attached the tag for you guys.
The rest of the codes don't come up with any Ford colors.
The 5W comes up as medium vaquero glow. That's the color of the seats, because this is an example I found and it's not the molding.
It's an 08 with WS (White Suede) ext code, but I can not seem to find the bumper and plastic trim color. It's kind of goldish.
Friend is certain it's arizona beige, same as his 05 f-150 fender and bumper trim, but I want to make sure.
Thanks
Can I get a p/n and quote on the mirror covers that come painted on the new 12's.
I want to replace my 08 textured black ones. I will get them color matched myself unless you can actually get them in WS.
Thanks
Anyone know where I can find these?
The window sticker doesn't tell me the rear end ratio, if it has limited slip, a block heater, front plate bracket and stuff like that...
Thanks.
Next time (and I may still do it) I'd lower the front at least an inch also.
The extruded power boards can be loostened and slid back slightly if ever the front would want to catch on the mud flap.
I've had a few suvs, but never one that has a rear window/tailgate that gets as dirty and full of snow as this one.
What are my options out there for rear window wind/air deflectors?
I'd like some sort of ventshade tinted abs type thing that matches the bug screen and my window venshades if it's...
Anyone want to trade a set of standard chrome headlights for the smoked ones that come on the limiteds?
If not, I want to buy a set. Where's the best place to purchase?
Thanks!
No issues whatsoever. Misses by 1/4-3/8 inch.
I used the two factory screws on the front actually using the hole locations in the directions. I added a third with a stand-off to the inner fender well. A long screw and a piece of 1/4" fuel line trimmed to the length I wanted and it was perfect.
According to Tousely Ford, they don't have the fancy body molded ones available anymore, they just have the standard flat ones.
I ordered a set for my KR with power boards. I'll take some pics and let you know how I mounted them when they get here and I get them installed. I'm not just putting...
A bad plug took out my #4 coil. The coil gets weak because it has to work harder to jump the ever increasing gap.
I just ordered the Lisle tool from Amazon and Ford PZT14F plugs. (the part number on the plug itself)
Hopefully I don't need the tool and it will go back.
In 04 the 3 valve...
My fathers Limi-Logo elglow emblem on his 02 PSD just stopped working and he wants a new one. I have yet to find another one.
I'm going to try the lo-glow one next.
This country's right on your heels! Now apparently we don't want your oil. It would slow down the "movement'. Hopefully people will wake up and get serious about changing the direction next time around...
What year?
Most are philips or 6mm hex screws. Nutdriver works the best. Some are hidden behind covers that need to be picked off with a flat blade screwdriver. After that everything should slide up and out. If it hits the door handle, the bezel around that propbably pops off to allow more...
Been researching this for a week now. It's #3 in the ford truck top 20 complaints. There's videos on how to replace the regualtors from start to finish. I see that some have good luck cleaning and lubing the rollers that the cables go around and this does make a lot of sense. There are no...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.