I came across this video where the guy added 4H button functionality that's not readily available in the 18-21 trucks without having to scroll through the drive modes (Mud/Rut for one). He grabbed the 22-24 drive mode switch version that has it and was surprisingly plug & play.
Just FYI for...
The charger quickly became outdated and cannot cope with today's phones. When you pull the WACS out of the consoles there is a whole module that controls it. The on-off cycling is due to the load on the charger, heat buildup, etc.
This is why generic extenders will not work for the optional Inflatable Rear Safety Belts (IRSB). Watch that video of how the charge detonator is designed an how it feeds it through the buckle (see picture) as it has a sealed "mouth" end on it.
Now if you had a non-IRSB, a generic belt...
The 5100's would gain you lift no matter what. For the sake of argument, a Billy on a normal truck would give you 2". On an FX4 package that's ~1" higher stock, the net difference may be 1" more.
Either way you should be able to achieve your end result in getting 35's under there.
I had one of those Tesla style setups in my previous Expy - Autotecpro. They're basically the same thing everywhere you look.
It's basically an overlay replacing the OEM screen and bezel. The APIM and other hardware is swapped over to the new unit. What this does is take over from the APIM...
In the BJB block (under hood), Fuse F36 appears to control the shutters. However, it is also shared with a number of other functions so I'm not sure if it were going "bad" a number of other items would fall out.
I bought this last year to work both my radar (Escort Max360) and dashcam mirror. Works pretty good and PnP.
https://www.amazon.com/dp/B0DL2QPNQ7?ref=ppx_yo2ov_dt_b_fed_asin_title
What others have said with the ground, have to charge downstream of that BMS sensor. I also did a writeup (https://www.expeditionforum.com/threads/how-to-ground-stud-install.57135/) where I added a ground stud at the end of the ground strap going to the fender. When I did this I also hardwired...
Averaging ~15 MPG. This truck is occasionally used for driving around town to run errands on weekends or a family road trip. Otherwise it's parked for the most part.
Last trip this past weekend was a 300 mile day trip and got about 17 MPG with the 35's added and the 3.73's that come with HD...
Your truck has the Integrated Wheel End (IWE) vacuum type hub. Ford has been switching to electronic on the MY22 on up I believe. Some don't have it at all now and the hubs are permanently engaged at all times.
By the pictures below, you can see the routing of how the hoses and the system...
Thank you for sharing this. Will have to look into it as I'm positive that this will have to prolong the life of the compressor by regulating the voltage (less cycling).
Legit concerns.
Although every manufacturer will have their way of approaching this and for what features. You may either have the choice of purchasing up front, after the fact, or pay as you go. This can be done either from the app or from the infotainment. An example I’ve seen from Ford...
Smoke color plays a pretty big indicator.
As mentioned, white smoke is coolant getting into the combustion which would generally be a head gasket leak.
Thin white smoke quickly dissipating would just be condensation in the exhaust system that would blow out/burn off quick, but I don't...
The guy is from Kuwait.
ROW usually uses RON rating system vs. NA using AKI.
Ratings are usually:
95 RON = ~91
98 RON = ~93
100 RON = ~95
This is also why imported cars tend to specify using higher octane ratings (i.e. 91) here in NA as our top tier here is their low/mid tier there.
IF you're using a fuse tap, F37 from what I can see in the BCM wiring diagram is the heated steering wheel module. That will shut off immediately and not on timer. If using the fuse tap, try other spots as they may be time delayed. The positions I listed are possibilities.
Related to the...
That would be funny if that was from my totaled truck. Same interior. Wrecked here in SC, I found it being parted out by some shop in the Orlando area.
I had the same thoughts once I saw you had that cleared out. Just level the trunk to the seat backs and create an enclosure.
Edit: I originally was watching at work without the sound. Rewatching with the narration I hear you calling that out.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.