Search results

  1. B

    Heavy Duty Radiator Swap

    Anyone know if it's a straight forward swap from the standard 2018 Radiator to the Heavy Duty 2018 Radiator?
  2. B

    Changing 2018 from 3.31 to 3.73

    Probably what I will end up doing.
  3. B

    Changing 2018 from 3.31 to 3.73

    Yes I did, the factory Ford controller installed by my dealer. Think my total out the door cost was like $350.
  4. B

    Changing 2018 from 3.31 to 3.73

    I think I'm just going to say screw it and tow with what I got.
  5. B

    Changing 2018 from 3.31 to 3.73

    True, cost me $300 for the new ring and pinion and labor to swap out the 2.79 to a 3.41 in my 8" chunk on my '68 Mustang. WD-40 and a Craftsman wrench will fix just about anything on my '68 Mustang.
  6. B

    Changing 2018 from 3.31 to 3.73

    Towing a 7000lb travel trailer occasionally. I won't be traveling all over the US with it. If I really get into the camping seen, I'll purchase and F250 SD PowerStroke so I can tow anything under the sun.
  7. B

    Changing 2018 from 3.31 to 3.73

    Well that sucks
  8. B

    Changing 2018 from 3.31 to 3.73

    I bought my 2018 brand new off the lot back in December 2017 and it did not come with the heavy duty tow package. It's a 4x4 Platinum Max. According to the Ford factory towing specs, the max I can tow with this setup is 6000lbs. Well I would like to be able to tow at least 8000 lbs. The...
  9. B

    Passenger side mirror freaking out

    Not only does this happen on my 2018 Expo, my 2017 Mustang GT does this also.
  10. B

    2007 Expo Front Brake Caliper ?

    So I picked up a new set from O'Reilly's and they are 7mm Hex. I would assume the originals are 7mm hex. I'll know for sure later this week when I change out my pads.
  11. B

    2007 Expo Front Brake Caliper ?

    Alright, so it's time to change the front brakes on the '07 Expo. No big deal, did it on my '03, and all of my other vehicles. I yank the front tire off, pop off the dust caps for the caliper bolts, well it's not a Torx 45 ('03 Expo was), not a torx 40,50, or 55. I get my SAE hex wrenches...
  12. B

    Exhaust Muffler Inlet/Outlet Size 2007 Expo

    Anyone know what the Inlet/Outlet size is on a stock 2007 5.4L Expo muffler is? 2.5" or 3". I know I will need a offset inlet/offset outlet FlowMaster.:) Thanks,
  13. B

    '07 Expo 4 to 5 Way Trailer Harness

    No 7 pin on my Expo, just the standard 4 pin plug. Guess I'll have to splice into the reverse light. I was hoping to avoid that. Thanks,
  14. B

    Aftermarket Vendor

    Is there a good after market vendor that caters to Expo's out there somewhere? I'm looking for stuff like CAI's, tuners, exhaust, etc.:) Thanks,
  15. B

    '07 Expo 4 to 5 Way Trailer Harness

    Yeah. I need to get off my lazy arse and check it. I do have the trailer brake pigtail under my dash. I wonder if something needs to be plugged into that to make that wire hot? Which wire is my reverse light?
  16. B

    4 pin to 5 pin Trailer Plug

    So my '07 Expo has the standard 4-pin plug only. Well my boat trailer has the 5-pin plug since it has trailer brakes. I noticed that my Expo has the blue wire capped off from the factory. I went to E-trailer and bought this. I spliced it in using the provided scotch lock but it does not...
  17. B

    '07 Expo 4 to 5 Way Trailer Harness

    4 to 5 Pin Connector I used http://www.etrailer.com/pc-A~47515.htm this, but it didn't work. I spliced it into the extra blue wire in the factory harness but no luck. I checked all of my fuses and all of them are good and there. Any ideas? I'm getting tired of getting out of the Expo to...
  18. B

    '07 Expo 4 to 5 Way Trailer Harness

    That just might work. Thanks,
  19. B

    '07 Expo 4 to 5 Way Trailer Harness

    So my '07 Expo Eddie has the standard 4 way trailer plug. Well my new boat has the 5 way since it has brakes. It's getting old having to get out and turn the plug around so I can back the darn thing up. I looked under the rear and the blue brake wire is there. But to hook that up I would...
  20. B

    Is your Expy parked lately? Mine is....

    Nope. I drive it everyday. Lucky I don't live far from work and can stretch out a tank to about 10 days. BTW, it's not Bush's fault, it's the Democratic led Congress that will not let us drill for our own oil in our own Country. Did you know that China & Cuba are drilling for oil 50 miles...
  21. B

    '07 Expo Tranny Issues?

    I'm starting to notice that when I'm in traffic my tranny starts to act funny. When I slow down, it hesitates and skips a few times, very noticeable. When I accelerate, it does the same thing. My '03 never did this. I also notice that under hard acceleration, the seat back move reward a tad...
  22. B

    Which tires are on your expy?

    Firestone Firehawk Indy 500 in the factory size. I like 'em.
  23. B

    Popping Noise From Rear A/C Blower '03 Expo

    Popping/Thumping Sound fm Rear A/C I'm beginning to think it is a relay/switch for the rear blower. Looking at the maint. manual, to get to that particular relay/switch you have to take off the rear qtr. panel trim. But do do that you have to take off the C & D pillar trim plus the rear trim...
  24. B

    Popping Noise From Rear A/C Blower '03 Expo

    Popping Sound Yesteday I had time to play with the controls. The popping sound happened no matter which vent selection I chose for the rear, floor or roof. When I cycled the temp setting to max cold and max hot, that's when the popping sound was loudest, but it the sound was different at max...
  25. B

    Popping Noise From Rear A/C Blower '03 Expo

    Popping Sound Thanks Green03. I'll give that a try.

Latest posts

Staff online

Members online

Total: 1,767 (members: 31, guests: 1,736)

Forum statistics

Threads
53,554
Posts
501,980
Members
47,106
Latest member
krazytedk

Share this page

Top