Search results

  1. 01exp4x4

    Stainless Exhaust INSTALLED!!!

    So the Gibson arrived today and the weather was perfect. So off with the old and on with the new! First, I used PB Blaster (rust penetrating oil) on all the bolts and let it sit for about 2 hours. I wanted them to come off easy. Meanwhile, I went to a friends shop with professional...
  2. 01exp4x4

    what's the best differential oil, regular or synthetic?

    trying to figure out the ultimate differential oil for my 9.75" with limited slip? Anyone? Ford Synthetic? Ford additive friction modifier? :fishing1:
  3. 01exp4x4

    New stainless exhaust on e_bay cheap - i bought one - one more left

    I bought this last night. ALMOST HALF OFF!!!! This one is $267 DELIVERED!!!!! All STAINLESS STEEL means you can polish it out like chrome... Thats what I am going to do. If you want the best deal on a GREAT cat back exhaust, here it is. Post and tell me if you bought it...
  4. 01exp4x4

    Where is the REVERSE wire???????

    I am looking for the reverse wire at the front of the vehicle under the dash or kick panel... I HAVE A GEN 2, 2003 REGULAR XLT Anybody know where the reverse wire is? Exactly where is it? Heard it is black with pink stripe... None of the threads here actually say where it is. I am not...
  5. 01exp4x4

    Rear camera install

    Its a Crime Stopper SV-6818.EM.II Cost $31 dollars from sonic electronics. Installed it along the stock wiring harness to the license plate lights. NOW... WHERE IS THAT REVERSE WIRE!????????????????????
  6. 01exp4x4

    aluminum VS. stamped steel control arms

    When the 03' came out it had aluminum control arms. Later they switch to stamped steel... Why? To save money? Seems like the Aluminum might be better, and cost more to make... ANYONE? ...opinions? I might polish my rear arms. LOL seriously... Just cause I could.
  7. 01exp4x4

    LEATHER SEATS WANTED have money and cloth seats to trade

    I am looking for Dark Grey or Charcoal colored LEATHER seats. All three rows. I have CASH and, I have an excellent set of cloth seats we can work into a deal. So you still have seats. OR, I will just buy your seats... Let me know 2003 - 2006 cell 909-510-1167
  8. 01exp4x4

    Parting out whole 2003 4.6 2wd black

    I have a bunch of nice parts at this e-bay link: 2dishannis | eBay If you are interested i anything, let me know. cell 909-510-1167 WHAT DO YOU NEED? I may have it. DOOR? HOOD? LIFT GATE? I have a lot more not listed: door seals, rear hatch seal, new KN drop in 03, all three rows of...
  9. 01exp4x4

    HID Twin Halo with LED and Tail Lights and Fog Lights

    SOLD! thanks for looking.
  10. 01exp4x4

    mileage and power - 5.4 2003

    5.4 mileage and power GUESSES?? What mileage increase could I see from KN intake and a Cat Back Gibson exhaust? Had 17 mpg on my drive from Cali to Nashville.
  11. 01exp4x4

    Happy Thanksgiving!

  12. 01exp4x4

    Factory SUB make-over???

    Has anybody re-done a custom sub in the original factory sub location? I want to see some pictures if you have them. Thanks, Jimmy
  13. 01exp4x4

    did I screw up the FX4?

    I put on this emblem to complete my FX4 look... The dang EXPEDITON emblem is crooked. My measurements from the gate to the emblem were only taken from the left side of the emblem... DARN! is it that obvious? ...or am I just obsessing? I wanted it to look factory...
  14. 01exp4x4

    stock to customized 2003 4x4

    Bought this 03' 4x4 a few weeks back in California. 29,000 original miles. Flew in to pick it up. Drove it 2300 miles home to Nashville. Here's the pictures. [Stock front without grill or paint BEFORE Extra Grill and paint AFTER Back before AFTER PAINT...
  15. 01exp4x4

    Choose my new ride height VOTE

    Hey guy's. Jimmy here. Bought an 03 with 29000 on the odometer last week. Bought some FX4 wheels. Now I am trying to decide what ride height looks best. I am worried about having to much geometry on the cv joints and wearing them out... So I put a jack under the front and back. I measured...
  16. 01exp4x4

    Ac gauge readings??? What should they read?

    Hi, I bought a set of ac gauges and hooked the up to the expy. What should they read on a 01 ford with dual air? What is the low pressure side suppose to read? What is the high pressure side suppose to read? At 100 degrees outside and 60% humidity, the low reads 60 psi and the high...
  17. 01exp4x4

    optimum EDGE settings for best mileage???

    Which setting on the Edge Programmer gets the best mileage? 1? 2? 3? Custom shift points?
  18. 01exp4x4

    K&N cold air intake - MILEAGE GAINS????

    How much better is the mileage with a K&N cold air intake?? Anyone ever use an edge programmer to see the true difference with and without the cold air intake? Very interested in buying both units. Just need to justify it with some REAL WORLD data like yours. Thanks, Jimmy.
  19. 01exp4x4

    Wanted... Life

    Maybe you need to get a life, since you just read this! Just Kidding!!!! LOL
  20. 01exp4x4

    WANTED: "K&N" cold air and "Edge" programmer

    WANTED: "K&N" cold air intake and "Edge" programmer. Have cash, can do pay pal, c.o.d. or meet you in person... cell 909-510-1167
  21. 01exp4x4

    Torque converter "SHUTTER" at lock up!

    Any one else notice a shuttering at lock up from the transmission? I am told that the stock converter has the four studs welded on and that creates a warped clutch surface. A new billet face clutch from Rev Max will eliminate that problem permanently... Any thoughts?????
  22. 01exp4x4

    New to forum, second expedition 4x4

    Hello, I just bought another 4x4 XLT because of the bad weather in Nashville TN and because of the extra room for my kids car seats. I used to have a 97 EB 4x4 when they came out... Loved it. No kids and no bad weather then, I lived in Los Angeles and used to go to Glamis or Mt. Baldy or Big...
  23. 01exp4x4

    Any tips for a torque converter swap on a 4x4?

    I am considering a rev max torque converter for my 01 EXP 4x4. I have torque converter shutter / vibration on the stock unit when it goes to converter lock up. The new converter has a billet front cover to eliminate the lock up "shutter" and a triple disc clutch. I was wondering if...

Latest posts

Members online

Total: 1,375 (members: 28, guests: 1,347)

Forum statistics

Threads
53,562
Posts
502,034
Members
47,115
Latest member
othermrsikes

Share this page

Top