Search results

  1. J

    Wife wants my Expy

    So my wife drove my Expy to work the other day. Her car was getting serviced. Apparently she got into the gas a little. She was like "Boy! I stepped on the gas getting into traffic and WOW it really took off. Can I have it?" So I said sure, if I can buy myself a new one (SPP). But now she's...
  2. J

    Swapping 4.10s into '23?

    I have a '23 Limited stealth (Not SPP). Is it possible to swap in 4.10s and reprogram the ECU? I also have the eLSD. Would it interfere with it? I'd love it if it got off the line better. What else would get screwed up other than a little hit to fuel mileage? Anyone swapped to higher...
  3. J

    FordPass no updates since Aug

    I have a 23 Limited with the Sync4A screen. I have been getting an error message on the FordPass screen on my phone to update my in-vehicle settings. Specifically to enables Location Sharing I can't lock/unlock/start it. It doesn't display current mileage and fuel level the way it used to. Every...
  4. J

    2022-23 brake rotor material

    Does anyone know what Ford did with the brake rotors on the new expeditions? The material looks different from the normal cast iron I've seen for brake rotors for decades. It looks sort of chalky mottled gray. With what appears like porosity. After many rain storms in the last month, there's not...
  5. J

    Volant CAI with Powercore installation

    I just got a Volant CAI with the powercore filter (#198356). It shows that it fits 2018-2022 Expedition. Mine is a 23. So I figured it's gotta be close enough right? Yup. It is pretty close. Not sure how it differs from a 2022 in any meaningful way. But I'm looking for anyone else with a 22/23...
  6. J

    3-port vs 2-port catch cans

    I've got a 23 expy about ready for delivery. I'll be installing a catch can (or 2). I've seen a few cans recommended. But there's a difference I need explained. The J&L...
  7. J

    2023 Expy with CCD and Superspring coil spacers

    I've got a 2011 Expy that I tow with. It has the towing package and I use a WDH. The trailer is about 6500 lbs. The Supersprings were a huge help eliminating sag even with the WDH. It tows much better. Less wallowing/porpoising. I have a 2023 on order. Limited Stealth Package (Not performance)...
  8. J

    ECU connector pinout for 2011 Expy

    Hey guys. I need to find the HSCAN wires at the ECU. Does anyone have access to the connector diagrams for the Body, Engine, and Transmission connectors that connect to the ECU? I'm in the home stretch of a project I'm working on. But I can't find them online. I'd really appreciate it. Thanks guys.
  9. J

    Oil pressure switch before or after filter

    In my 5.4L, Does the oil pressure switch sense the oil pressure before or after the oil filter? Thanks.
  10. J

    Auxiliary CAN BUS Module

    So my 3rd Gen (2011) Expedition has an HS-CAN bus that I can use an OBD2-Bluetooth adapter to connect to. I use Torque Pro to display various engine parameters. Temperatures, speed, etc. However, things like Oil Pressure, Oil temperature are not available to the ECM. So what if I want to know my...
  11. J

    Front blower only works on setting 3 & 4, 1&2 are dead

    Title says it. Sound like a bad resistor? Or would a fuse be the culprit? Thanks.
  12. J

    P0130 code set in 2011 Expy

    This morning I got a CEL and read the code with my ELM327 adapter and TorquePro. It shows P0130. O2 Sensor Circuit Malfunction (Bank 1, Sensor 1) So I go to read the O2 sensor voltages using Torque. But it doesn't show values for Sensor 1. There are only current readings for Bank 1 Sensor 2 and...
  13. J

    Front wiper linkage assembly replacement

    One of the ball ends of my wiper linkage has fallen off and won't stay on. I ordered a new wiper linkage assembly. I tried getting the old one out, but it seems to be the only way to get it out is to remove the hood/hinge. Is this anyone else's experience or am I missing something? Thanks in...
  14. J

    Location of evap solenoid on 2011 Expy

    I just got a P0446 code yesterday on my way home. I've found some information on what it is. Some reasons why it happens. But I can't seem to find any diagrams of where the thing actually is? Can some one help me out? I'd really appreciate it. Coincidentally, my passenger side windshield wiper...
  15. J

    Supercharger for 2011

    I've been doing some searching and can't seem to find a roots/screw supercharger for the 5.4 3V in an expedition. Maybe you guys can help. I'm hoping to find a positive displacement supercharger with an intercooler. I want more low end so the engine isn't screaming to pull my TT up a hill. Not...
  16. J

    Increased oil consumption while towing?

    I have a 2011 Ford Expedition 5.4L, 3.31 axle and 96000 miles. Typically I change my oil every 6000 miles and am never more than a quart low at the change. This last time though, yesterday, I was 3 quarts low. I've been towing a lot this summer. Has anyone experienced increased oil consumption...
  17. J

    One high beam out - Not the bulb

    My right high beam is out. It won't light at all. High beams or flash to pass. I checked all the fuses (7,8, & 23 inside). The left side high beam works fine. I have Anzo housings, but replaced the left side with the old housing to test. Still no luck. I've swapped bulbs and get no light...
  18. J

    Retrofit Medcanical load leveling shocks to 2011

    From what I can gather, the "mechanical load leveling" rear suspension on the 2014/2015 Expeditions requires no vehicle integration (electronics, pumps, etc). Nivomat Shock Absorbers: Self-Leveling Monotube Ride Control Units Would it be possible to install these in the rear of my 2011? Has...
  19. J

    New plugs and COPs for my '11

    After a nagging stumble under acceleration that has existed since last year, I've decided to get new plugs and coils. Under moderate acceleration, like up an entrance ramp, I can feel the truck repeatedly "stumble". It's a quick momentary loss of power like a cylinder is dropping or misfiring...
  20. J

    3rd gen Anzo headlight review

    This a partial review. I'll explain later. I purchased a set of Anzo 111114 (Chrome) off eBay at a discount due to malfunctioning LEDs (the small rows of 5 LEDs on each light). They were installed as is with stock bulbs (included) Pros: 1. Big improvement over stock lighting. Low beams have a...
  21. J

    COP Part number for 2011

    I've got the miss under moderate to hard acceleration, so I'm looking for prices on new coils. Mileage has never been great (best ever was 18.5mpg on the highway driving VERY carefully). recently though I had a long trip and averaged 16.5mpg. Not buying them yet, I need to do some more...
  22. J

    Driver's window slowing down

    Uh Oh. Driver's door window is getting real sluggish. Let's hope it holds out until spring when I do the stereo and door speakers. I can swap the regulators then.
  23. J

    stumble/rough at light load 1500-2000 RPM

    I have a 2011 XLT with about 42,000mi. In the 1500-2000 RPM range (really right about 1800) under very light acceleration or even in park (slowly bringing revs up), the engine has a very slight stumble. Idles smoothly, plenty of power otherwise. No highway or heavy load missing. Torque Pro shows...
  24. J

    Reverse light replacement

    The reverse lights on my 11 xlt are crap. IMHO. What is out there to boost their output? I can't seem to find any real good LED replacements that fit the small wedge base (T10) 921. Would be nice if they were 3156s. Short of hanging additional lights off the bumper, thoughts? I'm working my way...
  25. J

    2011 subwoofer

    I have an 11 XLT (non-EL) without a sub. But I gather that it was available as an option. However, I can't find an OEM unit or an aftermarket one ANYWHERE. I've found the ones for the EL. But None for my XLT. Has anyone found a source for an OEM or aftermarket enclosure? Sent from my...
Top