i noticed when i first bought my 99 expy like a year ago when i started it with it in gear i can fell in lurch forward just a bit.whats going on here? it's only slight movement but enough to were i can fell it sitting in the thing, seems like it shifts fine while driving though an the movement...
I got a transponder from junk yard to hopefully replace the button in my working/programmed one they are the same so i am sure it will fit BUT
My question if i swap the button pad out is it going reset the thing ? being the battery will not be in. i am thinking if i do it fast enough it will...
Anyone got the ebay Shorty Performance Headers ? can ya give any feedback such as fitment issues,leaking,and modification to anything to get them on
Thinking about getting a set for my 99 since passenger side exhaust manifold has a hole in it and the drivers side is getting rusty plus the...
iv looked for a few mins got tired of going threw all the post. Looking to get some mud diggers in the future and id like to go bigger all stock right now
What size mud tire can i go up to and still clear.or maybe a very slight trimming.32's clear ?? i don't plan to lift the truck at all
wondering if a four wheeler/3 wheeler "bigger then a 125" will fit ?
i remember back in the late 90's father had a 250 sx 3 wheeler an would load it in the back of his 87 Suburban just had to fold the handle bars down
What's the BIGGEST thing you put in the back ???
The hood struts on my 99 doesn't hold the hood up all that good. i have to lift it up.Is it just because it's winter "only 19 degrees out today" i never own a car with hood struts and this is the first winter owning my expy.
They ok or am i goona have to get replacements ? only asking because...
I know this may not be the forum to post on but since iv been joined for awhile now its got my wondering
If there was anyone else on here that loves building models just as much as i do and if anyone has done and """"Expedition """ up to look like there real one.
I love building model cars...
Did i get the right one for a 1999 5.4 ? will be doing head gaskets sometime in the future, just trying to get the tools and other stuff ready for the job.
Any other special tools i need ???
Is there any write up on here about swapping a manual trans into auto expy ?
Was wondering what all parts needed ?
Whats involved with clutch pedal and brake pedal to work? Will it just swap in ?
i know when i did a trans swap auto to manual on my 88 Ranger, clutch pedal and brake pedal i...
I got the radio few days ago and i notice there is a port on the back of it "like a headphone jack" headphones do plug in it. it doesn't say any were on the radio what it is and i found an on line owners manual and didn't see anything about it i took the top cover plate off and there is a chip...
any parts off a 1st gen lincoln navigator better/upgraded parts to fit a 1st gen expedition just wondering cause theres 1 navigator up at the yard and there are like 6 or maybe more expedition i was just wondering if there were maybe better or upgraded stuff from a navigator mainly just bolt on...
I trimmed my radio/heater bracket and got my aftermarket cd player to fit in but now i need the right plugs that will plug into the factory radio plug connectors,i know if i wanted to i could just hack the factory plugs off but i am NOT wanting to do that cause i may sell and if someone ever...
i got the 99 5.4 Triton and was just wondering would it be = to a 302, or 351 or what, Can some one tell me and is it consider a Cleveland or Windsor or am i thinking old school engines
goona be doing a head gasket on the 99 ford expo 5.4 any special tools needed ? what is the hardest part of the job ? i already manged to get the exhaust manifold bolts/studs loose will need to replace them along with left exhaust manifold,already pressure wash and used compressed air to get...
I plan to buy a new exhaust man but trying to decide what would be better and make the job installing it easier. The manifold has rust issues.i proceeded to try and remove the badly rusted studs that are in there.i managed to beat a smaller size socket on them and got most of them broke...
Iv seen plenty with round ones behind the grill. Does anyone have square ones and if so post your pics of em
only interested in seeing 1st gens Expy's or F150's with them to get an idea might just put my two 100 watt ones i have idk yet though since i can't legally run my 20 led light bar on...
Here's a diagram that i drew up since i can't find the same one as mine on google
"front of plug" that plugs into the multi function switch
Been trying for a while now to get my turn signals to work i guess the LB wire that has ?? is Turn Signal Feed, hot in run.
Well turns out i am not...
Got NO TURN SIGNALS all other lights work,I got to messing around with the blue relay that located under the dash that is for the "signals and 4 way flashers" I pulled the relay out a little bit and with my test light touch pin #2 and #4 together "while key was on" and "the signal switch on to...
Here's the tag I unbolted off the rear the other day.if anyone could tell me what rear I got AND ratio it is that be nice .need to order the oil seals, bearings seem nice and tight still YES I know I should change both side bearings to while an at it.just don't have the money later down the road...
Front heater is nice and hot, rear heater just blows cool, no heat at all ,YES i had the knob turned in "red" position Both on dash,over head control even the rear over head control NEED some advise thanks
Since I am not going to be using the third row seat anymore.I decide to unbolt the bracket /mount that's bolted to the seat that holds it into place back there.I am going to find a "BIGGER BOX" and bolt it to the original bracket using some nice bolts and bigger rounder washer that way it will...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.