If anyone has a circuit diagram so I can figure out why my 4x4 is not working I would appreciate it. 4x4 is not engaging and neither the 4 high or 4 low lights will come on in the instrument cluster. Not getting power somewhere in the chain. Thanks in advance!
I recently had my transfer case replaced on my 04 eddie bauer with a used unit (mechanic said it was stuck in 4 high) and this apparently damaged the transmission so as soon as I got it home I had to take it to a transmission shop for a rebuild. I tried to engage 4x4 yesterday and nothing...
When I bought my 04 EB 4x4 expy it came with an aftermarket K&N air induction system on it and I'm not fond of oiling and dealing with the K&N filters at all. I bought an OEM intake system from a salvage yard but am having an issue due to a piece missing apparently. There are 2 hoses that attach...
2004 Eddie Bauer 5.4L 4x4
Blinkers on my Expedition work fine, and all of the other trailer connector wires have voltage and are working, I just don't have any voltage on the left stop/blinker wire on either the 4 or the 7 wire connector.
I have wiring diagrams, anyone had this issue before...
I couldn't really find much about this when I was looking for info so I thought I would post what I did when my positive terminal end needed replaced. I did not want to spend the money on new cables.
You will need:
Heavy Duty large marine battery terminal end( I got mine from wallyworld)...
Hello. If anyone has them, I could use the wiring diagrams for a 2004 Eddie Bauer 5.4L 4x4 . I've got an issue with my left blinker not working on either of my trailer plugs. Thanks for your help!
I recently purchased a 04 Eddie Bauer 4x4 (5.4l) and the push clips that holds in place the overhead storage bin (sunglass holder?) and the dvd player screen are missing. Also, the pull handle for the rear storage bin in the floor behind the 3rd row seat is broke and I can't get the storage bin...
I recently purchased a 04 Eddie Bauer 4x4 (5.4l) and the push clips that holds in place the overhead storage bin (sunglass holder?) and the dvd player screen are missing. Also, the pull handle for the rear storage bin in the floor behind the 3rd row seat is broke and I can't get the storage bin...
I need to replace upper ball joints, lower control arms, inner and outer tie rod ends, idler arm, and stabilizer bar end links. Does anyone have any good resources for instruction? I've worked on pretty much everything else on vehicles before but never done any front suspension work other than...
They just randomly unlatch. Anyone else have this problem and any suggestions on fixing this? Any ideas where I can get replacements, other than the dealership which I imagine would be expensive. Thanks in advance!
I believe I read somewhere that there was a change in the steering sector on the 2002 and that the steering handles better due to that. Does anyone have any details on that? I seem to remember driving an older 1st gen and not liking the steering compared to my 02. Thinking about getting a 2nd...
Once or twice a day my 02 Expy with 4.6L randomly loses power. It cuts out for about a second or less and then everything is normal. It seems to mainly happen when accelerating from being stopped. It almost seems like the fuel pump loses pressure for a second but I had the pump and the fuel...
I drove my 2002 with 4.6L to a store, when I came out it would crank but not start. I couldn't hear the fuel pump engaging and it was acting like it wasn't getting fuel or spark. Had it towed home, shot some starting fluid in the air inlet and it fired up ran for a few seconds and died. Tried...
As a starting point to troubleshooting this, I want to pull the rear blend door actuator to see if it is working but I can't find information anywhere on where it is exactly and steps to get to it. The front AC works great. Any insight into what might be causing only the rear HVAC to not blow...
As soon as the pressure switch on the master cylinder is connected it blows the 5 amp fuse associated with the windows/ interior lights/ and gear shifter interlock. The pressure switch is new and I can unplug the switch and put a wire in the harness that clips to the pressure switch and the fuse...
I have a feeling from my research that this is the timing chain. Does anyone have any insight into this noise?
This was a single owner vehicle before I bought it in 2013. It has been well taken care of but this sucker has 309,000 miles on it. It runs great but now I have this rattling noise.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.