Search results

  1. J

    Misfire Cylinder 5? Second motor, and PCM?

    As simple of a solution as it sounds, it's not a solution. My registration has expired. It has to go thru inspection every 2 years {Arizona) and it is due this time. Which means the truck has to actually work. I haven't a test light for doing plug test. I did notice couple days ago...
  2. J

    Misfire Cylinder 5? Second motor, and PCM?

    2006 Limited 2wd I struggled a while back with a code [cylinder 5 misfire] and I went thru everything. I changed the cam sensors. I pulled the phaser off to see if it was stuck. I examined the top end while valve cover was off [tend to drop rocker]. Injectors. Spark. Limp mode, the...
  3. J

    Headlamps?

    I'm an electrician so I understand wiring just fine. I'm not looking for extra cool or what not. I replaced rear assemblies with same style (front are close to the ones already on truck). I just want function. I fixed door locks. Put in re-man engine/tranny, just want clean truck.
  4. J

    Headlamps?

    I ordered these for replacements and wanted to get imput on lamps. I would like something bright, but controlled so it doesn't point in the face of oncoming traffic. Any suggestions please?
  5. J

    Programming Door locks 2006 Exp.

    I know this is an old thread, but no luck. Method one works, but doesn't. Going through setup i only have auto lock, not auto unlock. So doing this method only disabled auto lock, I know as I went through setup afterwords and found auto lock now set to off instead of hoping to find auto...
  6. J

    Interior door handle fix?

    2006 limited
  7. J

    Interior door handle fix?

    Thank you. Both items have been ordered. She isn't the best, but I don't want the worst.
  8. J

    Interior door handle fix?

    Thank you kindly. I must ask, best option for rear door window switch, mine was fallen through when I bought truck.
  9. J

    Interior door handle fix?

    What is the piece under panel that everything mounts to? I was fixing the outside handle and broke the upper clip that holds inside handle. Girlfriends kid yanked on it before unlocking it and broke it off completely.
  10. J

    Fluids 07 new motor break in?

    Thank you. Also I forgot to mention coolant.
  11. J

    Fluids 07 new motor break in?

    I know I'll have it finished today, reman 5.4 from powertrain products and rebuilt tranny from street smart. I have tranny and oil dipstick to bolt it, intake to put back on, houses and plugs, radiator and fan, alternator and ecu. Powertrain instructions is no synthetic for first 5k miles, oil...
  12. J

    5.0 coyote swap?

    Found it. https://performanceparts.ford.com/part/M-6017-M50A
  13. J

    5.0 coyote swap?

    Tranny will be in 11/3/20 and the engine will be in 11/6/20 and were about $5300 https://www.powertrainproducts.net/FORD-5-4-V8-ENGINE-04-06-F150-NAVIGATOR-EXPEDITION-p/1579.htm https://streetsmarttransmission.com/remanufactured-4r75e-transmissions/ I just want it running again, it looks sad...
  14. J

    5.0 coyote swap?

    Back towards the beginning of the year I found a post either here or f150 enthusiasts about a harness for sells for $1500 to bolt a coyote into older Fords to run that motor into ecu and Trans controller and have everything working properly. I cannot for the life of me find that post. Before...
  15. J

    Help needed 06 expo OBD2 codes

    Truck spent entire weekend with the PCM disconnected to get to bank 1, but I never tore into that side. I put all back together today so I can get it to work this week and deal with whatever comes later, later. I've been having a battery issue for a week or so now, it got drained from having a...
  16. J

    Help needed 06 expo OBD2 codes

    Wow, camera picked up everything. You can't hear it missing standing in front of it. I should have watched before posting.
  17. J

    Help needed 06 expo OBD2 codes

    Bank 1, Haha...... ugh...... I didn't want to hear that. Damn. I bent there tab on bank 2, no go. I'm just going to start breaking into it. I'll start with bank 2 cover and pull VVT actuator out and do a full clean. Anything special or can I use carb cleaner? Here is cold start. I...
  18. J

    Help needed 06 expo OBD2 codes

    I just ordered this https://www.amazon.com/dp/B01L17TPT2/ref=cm_sw_r_em_apa_i_je.dEbB0BPG80 will be here Sunday. Best I can do. It got dark here 2 hours ago and is down to 45° so I'll pull both cam covers tomorrow and pull both VVT and clean/inspect, and I guess I'm looking into timing chain...
  19. J

    Help needed 06 expo OBD2 codes

    I have ran that way, also with the position sensors unplugged at same time. There was no difference plugged or unplugged, runs exact same (at idle) (if it linked right) The noise at first is airflow in intake and fan. The ticking under valve covers is only noise it makes, and the power...
  20. J

    Help needed 06 expo OBD2 codes

    I don't have a fuel pressure tester. I'm in Tucson Arizona, we are a dry warm climate, and I didn't pull the vvt off. I only opened one side, passenger side is a nightmare under everything.
  21. J

    Help needed 06 expo OBD2 codes

    I have no valve train noise. It runs smooth and quite. First time today after work it cranked till I thought I would need a jump, but fired up at last second, otherwise it had been jerking ever so slightly for last few days like the fuel pump was going out. But the codes I got are all over...
  22. J

    Help needed 06 expo OBD2 codes

    Light came on and I took to local auto parts store that does free code check. Came back camshaft position sensor back 2 bad. So I replaced both, Light stayed on. So I bought a scan tool. https://www.boschdiagnostics.com/diy/products/bosch-obd-1200 and went home to do some testing. First...
  23. J

    Factory sub.

    Essentially I was expecting 1000w max output on amp. Ok under powering speaker. But total 500rms/2000 on 2 subs at 12” makes no sense at all (math wise) when I can’t find amp that does 500wrms/2000w max at any ohm. I get either total match rms/no where near max or max match blown rms. Doing...
  24. J

    Factory sub.

    Yeah I used Crutchfield wire diagram to wire subs and amp. I’m sure I got the strong end of the unicorn horn when I first started this. I bought the kenwood amp some time ago. It showed 1000w max when I got it. (Go easy, I’m nearing 47 years young) back in my day a 500w amp was 500w, there...
  25. J

    Factory sub.

    I’m replacing with a dvc 4ohm but wired at 2ohm. It is rated at 600w rms/1200w max and under powering it with an amp @ 2ohms has 500w rms/1000w max. I worry how long the plastic box will hold up.

Latest posts

Members online

Total: 1,152 (members: 14, guests: 1,138)

Forum statistics

Threads
53,533
Posts
501,776
Members
47,056
Latest member
jpwiseman

Share this page

Top