IS this "Show up" only in the Configuration and Programming tab(Chip Icon) or are these the only modules that are listed in the Modules tab(Car Icon) If all the modules this truck has and readable with the EX are listed in the modules tab under PWM and ISO network trees then the EX is likely...
He doesn't have a choice. The housing will have to come out and there may be a Differential side gear change needed!
There was a TSB on this that I read way back but I can't seem to find it now! This is Likely one of the early builds(Built before the middle of March 03 Referred to in TSB) that...
The Transfer case locks direct in 4HI and 4low by the the transfer case shift motor turning a cam and and shifting a collar to connect the transmission out put shaft to the front drive sprocket(4HI direct drive) and to gear reduction Planetary gear set in 4 low after the Electric clutch(4HI...
If you change that second block 8 or a 2 to an E that will set the IPC to "Not Equipped with TPMS" and the IPC will never poll the module for the TPMS reading(the non AsBuilt configuration should have a drop down set of options for this too). This is how my 03 Eddie Bauer was set as it did not...
Hi Lee
This is actually a little more complicated than hamfist is suggesting and if the problem were up that far none of the locks would be working. The actuators are actually a linear motor that are fed power and ground on different wires from the VSM, e.g. + power on pink/black wire, ground...
Hello GetDealtwith
The instrument cluster configuration non asbuilt should have the choices listed under TPMS as "enabled " "disabled" and "not equipped". Not equipped will turn the messenger area warning off completely and disabled will give the warning "TPMS Turned Off" on start up.
Also...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.