Search results

  1. K

    Superchips F5 Flashpaq 4845 Tuner CARB Compliant

    F5 Flashpaq model 4845 tuner. It is California legal. Used it in my 2005 Expedition; compatible with other makes and models. Check for compatibility: https://www.holley.com/products/tuners_and_programmers/handheld_tuners/superchips_f5_flashpaq/parts/4845 It comes with everything in the pics...
  2. K

    Whipple Stage 1 System

    Has anyone installed the whole Whipple Stage 1 Kit? Considering this one since it is CARB exempt.
  3. K

    Sway Bar Disconnects

    Anyone found off the shelf sway bar disconnects that fit or have fabricated some?
  4. K

    Rough Country Shackle Mounts

    Rough Country RS150. This is the version that doesn’t come with shackles. Had to pop off the tow hook bezels. Got one on so far. The bottom makes intact with the lower edge of the opening.
  5. K

    Baja Forged Rear Bumper Guard

    Anyone have this installed? https://www.bajaforged.com/product-page/baja-forged-2022-2018-ford-expedition-rear-bumper-guard? It looks like hitch pin and trailer wiring connector are blocked or may be difficult to access so I’m wondering about that. Also, pricey.
  6. K

    RCI Skid Plates

    RCI is having a 15% sale right now so I am thinking about getting a complete set. Just wanted to confirm with folks that have installed both the engine and tranny skid plates that these are indeed the correct one to get: https://rcimetalworks.com/product-category/ford/expedition-navigator/...
  7. K

    Hellwig Front Bushing Replacement

    It didn't take long for a clunking noise to start after the front OEM bar was replaced with the Hellwig unit. Got worse as time went by. Ordered Prothane part no. 191505 from suspension.com and replaced them today. Didn't hear any clunking with a short test drive. The Prothane bushings are...
  8. K

    Stock Front Sway Bar Diameter

    Does anyone know the diameter of the front OEM sway bar? TIA
  9. K

    Wheel Alignment Specs

    Anyone have the alignment specs? Just want to compare them to what ReadyLift recommends. TIA
  10. K

    Eaz-Lift Trekker or ReCurve R6 WDH

    Anyone have any direct experience with either the Trekker or Recurve R6 WDH models? The features appear to be very similar. Been using a Husky Centerline TS for several years now and looking to replace it. The Husky doesn't return to center well after turning and the trunnion bolts loosen up...
  11. K

    Factory Crossbar Screw Size

    Does anyone know the size of the screws used to attach the crossbars to the rails?
  12. K

    Two-way Radio Antenna Mount & Cable Routing

    I plan to get a cellular booster and looking for ideas on antenna mounting and cable pass through into the cabin. If available, I am thinking about a clamp-on type of roof rail mount that allows for the antenna to be folded down for garage parking. Open to any suggestions.
  13. K

    Adjustable CCD Sensor Links

    Ordered a set of these and they arrived quickly. Nicely packaged. Each pair was even shrink wrapped together with installation instructions to mark the angle of the CCD arms. I didn't know about them until after the Readylift kit was installed. How can I determine what the angle of the CCD...
  14. K

    Engine Cover Installed

    Dropped this thing in. Didn't have to trim anything. Unboxing, opening the hood, and taking out tools took longer.
  15. K

    Front Bumper Cap Next to Lower Vent

    On the front bumper, there's a cover that looks like it is removable. It's only on one side. Anyone know what's behind it?
  16. K

    WeatherTech Mud Flaps On

    Never been a fan of mud flaps. On previous 4x4's, OEM flaps got ripped off on the trail or went into the garbage. Figured these don't look too bad and will help keep rocks/pebbles from getting kicked up onto the travel trailer. They fit well and were easy to install.
  17. K

    E&R Console Lock Vault Installed

    **Oops, typo in the thread title. Should be "E&G" instead of R.** Installed this bad boy today. Got it from Real Truck. https://realtruck.com/p/e-g-console-lock-vault/egc-7045-1000-17/ Fit and finish is great; it is well made. One nice detail that I noticed is that with the compartment...
  18. K

    BuiltRight Dash Mount Installed

    Got the BuiltRight Industries Dash Mount and Support Plate installed today. Decided to keep the pad on so got slightly longer screws stainless hex screws.
  19. K

    Front Under Seat Accessory Mount

    Wondering if this would work on a Gen 4 or if there's something similar available that would fit. https://desertdoesit.com/collections/ford-parts/products/2015-ford-truck-seat-mount-molle-panel-multi-mount-panel-mmp Fitment shows: 2015-2020 Ford F150 2017-2020 Ford Raptor 2017-2020 Ford...
  20. K

    Fuel Door Position

    My fuel door isn't flush with the body. Is it suppose to be like this?
  21. K

    Bumper Opening to Hitch

    It looks like the safety chains would make contact with the lower portion of the receiver opening on the bumper. Anyone use something to protect that little portion of the bumper when towing?
  22. K

    2020 to 2021 Limited Differences

    Hi Everyone, Currently, have a 2005 Eddie Bauer with Heavy Tow Package that is used mainly to tow a travel trailer. Looking into replacing it with a loaded Max Limited Stealth Edition. Going with the Max to be able to have some cargo space with the 3rd row up. Dealer inventory show that...
  23. K

    Hello!

    Hi Everyone, I have a 2005 Ford Expedition Eddie Bauer. Bought it used from a friend several years ago that kept in great condition. Might be looking to replace it so wanted to pop in here to learn more about the current generation models. Found this forum through Google searches. K

Latest posts

Members online

Total: 996 (members: 17, guests: 979)

Forum statistics

Threads
53,572
Posts
502,084
Members
47,129
Latest member
ironwil

Share this page

Top