2003 expedition expansion valve thermocouple wiring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ripfirer1

New Member
Joined
Aug 21, 2022
Posts
2
Reaction score
0
Location
usa
I have post this already once. I have even call a few of the ford dealership here in town, and they are stump here my first post:
I been working on this problem for a while. when i change the expansion valve, I found the thermocouple not connected to any wire. the harness had wire that was connected to the high-pressure switch with left the other two not connected. if i plug the thermos into the pressure switch, that left this wire in the picture plug the wire from the harness nowhere to plug into My Hanes doesn't show any wiring diagram for this. had anyone else ran into this problem? one more thing the second pic show the pressure switch from the harness. any help would be greatly welcome
 

Attachments

  • IMG_9774.JPG
    IMG_9774.JPG
    193.5 KB · Views: 9
  • IMG_9848.JPG
    IMG_9848.JPG
    151.9 KB · Views: 9

Hamfisted

Full Access Members
Joined
Nov 20, 2012
Posts
2,581
Reaction score
1,465
Location
Ft Lauderdale
Here's the wiring diagrams for the AC circuit. You didn't say if you had Auto AC or Manual AC, so here's both wiring diagrams.
 

Attachments

  • 2003 Expy Manual AC Circuit.pdf
    83.7 KB · Views: 4
  • 2003 Expy Auto AC Circuit.pdf
    133 KB · Views: 4
Top