2013 Turn Signal Flasher

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Z

ZMJohnson

Member
Joined
Jan 12, 2023
Posts
10
Reaction score
0
Location
Houston
It's possible it was added after the 2013 model year, or it could be tied to another module. I suggest checking to see if any earlier model year F150s had the setting someplace, as many of the configuration settings overlap. If you can't find the setting in Forscan you may need to add a resistor.
Yeah, I may just add resistors. I looked in each and every menu and the only thing I found was one setting for detecting outages. When I changed that, it still hyper flashed. It looks like I am going to be adding resistors. Thanks though.
 

JasonH

Full Access Members
Joined
Nov 12, 2018
Posts
1,313
Reaction score
684
Location
Houston, TX
Disabling the outage setting for the rear lamp should have fixed the hyperflash. Can you post a screen shot of the setting you changed?
 
Top