A/C trouble

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
R

RWheelihan

Member
Joined
Sep 13, 2022
Posts
7
Reaction score
1
Location
Florida
I have checked and ohmed the wires going from the coil connection to the pin that actually inserts into the computer for that cylinder. They are good. I have signal all the way through the positive and negative wire going to that coil.
 
OP
OP
R

RWheelihan

Member
Joined
Sep 13, 2022
Posts
7
Reaction score
1
Location
Florida
So I found that the signal wire going to the coil was indeed broken and would occasionally make contact and that’s why it would ohm out good but sometimes wouldn’t. anyway I went to ford and got the replacement plug to the coil and spliced ig in. All good now and the A/C is running just fine and no stumbles or engine code.

Sorry for the long time passing since I posted, I had an emergency appendix removal. Thanks everyone who assisted with suggestions.
 

Latest posts

Forum statistics

Threads
53,391
Posts
500,598
Members
46,798
Latest member
geovanni
Top