Blower motor resistor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mllink

New Member
Joined
Sep 12, 2021
Posts
3
Reaction score
0
Location
georgia
Help needed, New member from Vidalia, Ga. I replaced the front blower motor resistor because the fan would not blow. NOW it blows on high and high only. 2016 Exp EL Limited. Any ideas?
 

bschoch

Member
Joined
Oct 18, 2021
Posts
8
Reaction score
1
Location
Florida
Did you ever figure anything out? We have been having some issues with our new to us Exped as well - the front blower now completely wont blow, after the 'fix' of the connector/pigtail and blower motor - the rear ac will only blow cold on certain settings, but even then, intermittently... I am thinking it is the control module, but not 100% sure...
 

Adieu

Full Access Members
Joined
Dec 22, 2016
Posts
3,700
Reaction score
786
Location
SoCal
Sounds like a crappy resistor or a burnt out connector

If swapping it changed the result, that means you've located the source of the problem
 

bschoch

Member
Joined
Oct 18, 2021
Posts
8
Reaction score
1
Location
Florida
The white/violet wire is the speed wire, If you need the wiring diagrams or manual you can download it at Cardiagn.com for free. The wiring diagrams might help with the troubleshooting.
The wiring diagrams and pinpoint tests here are most helpful!
 
Top