aircargoo
Full Access Members
im gonna go moog....i did my 97 with moog bearings and wagner pads. gonna do 03 same way same brands.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
They can be pulled and replaced. That's a lot of extra work to go used now and replace later, but gotta do what you gotta do I suppose.So i'll start by saying I am aware of the idiocy of using used parts to fix vehicles... but I am in a pinch for the next 2 weeks and have to get my 03 4x4 expedition up and running for as cheap as possible. I have to replace just the front passenger Lower control arm. Can I pull a used one from a salvage yard for the time being? Or do you ruin them when you pull them?
Why replace them again?I used Detroit axle on mine 4 yrs ago and they are still going strong. Going to install a new set all the way around when installing my lift and brakes.
I used Detroit axle on mine 4 yrs ago and they are still going strong. Going to install a new set all the way around when installing my lift and brakes.