Ive searched everywhere - Need help with Sheriffs vehicle cup holder.

[OEMWheelExchange]

i can not find any other Expos that have front slide out cup holders. NO middle console since it was a Sheriffs vehicle. Mine does not have middle console.
i can find 2007 and up stuff but nothing for 2006. I need the coin holder ash trey that goes in the middle of the cup holders.

 

[Trainmaster]

Well at least I know exactly what you mean. I know that mechanical cup holder well. But I don't have an answer for you. Post a picture of the cup holder. Maybe some other model, like an F-150 uses it.

 

[OEMWheelExchange]

ive looked at all years f150 and all models interior can not find one that has slide out cup holders.
im wondering if its specific to the sheriffs/police vehicles

 

[whtbronco]

I believe it would only have been available on XLS models that were almost exclusively available for fleet sales, gov't and first responders. Unless you're opposed to it, it might be easier to find and install a console. I suspect the floor pan is the same between the models and thus you'd need to find bolts and probably unplug the threaded retainers on the floor pan.

I spent several years looking for an XLS model in the salvage yards in my area, up to 100 mile radius, with no luck.

 

[OEMWheelExchange]

wow! thats very interesting. ok well at least i know. ill have to figure it out. thanks so much!!!

 

[Trainmaster]

The 2nd Generation XLT's with bench seat/folding arm rest had them. Look for one of those. I drove one for years.

 

[whtbronco]

The 2nd Generation XLT's with bench seat/folding arm rest had them. Look for one of those. I drove one for years.

Cool, I didn't even know you could get a bench seat in an XLT. I definitely prefer bench seats.

 

[Trainmaster]

Front bench seats were available through 2008. 60/40 with a fold-down armrest.