Let's See Those Lifted / Big Tire Gen 4s!!

[imjuststeven]

Wonder if that's because it's got the icon vs. the 3/2 readylift. Also just had a thought...wonder if the ones that have done the bilstein shocks vs the 3/2 still have the same issue?

not sure if this has been mentioned yet. but the rough country 3/2 lift claims to center the rear wheel. i’m debating going with it vs the readylift. really want that wheel centered but don’t wanna deal with ccd issues.

 

[darkmatter]

Here's my '24 Max Stealth Performance that used to have the CCD. Combo of Ready Lift and Rough Country. The 300 or so lbs of bikes and rack caused me to add the sumo springs after this pic. I'm still working on the error codes with the Icon by pass (hopefully). 4wd/2wd still works. Just missing the different throttle modes.

 

[StealthyBulldog]

Just upgraded my summer rims to a more aggressive tire. Went with Toyo Open Country AT3's, 275/60R20. Raised the vehicle about an inch with the taller tires.




Quite happy with the look. Went with a set of VORTEK VRP-501GB +18 offset. They definitely poke out slightly more than the factory, but it actually seems like it's mostly just sidewall, the actual tread is still inside the wheel wells.


Here's a side by side of my winter 20's (that are down to about 6 depth


And now the actual rims and tires on!! (This is just after putting on so haven't washed the rubber yet)

Oops, guess I'll make another post since we can only post 5 pics at a time!

 

[StealthyBulldog]

Sorry about that! Here's the continuation of the last post VORTEK VRP-501GB 20" +18 with Toyo Open Country AT3's




So do/did need to trim the mud flaps a bit, no rubbing on the wheel well liner. It's mostly just when cranked and backing in my driveway that it rubs a little. So far quite pleased. Haven't had a chance to take out on the highway and check fuel mileage or noticeable road noise, been busy with house projects. Will update when I do. Thanks for looking!

 

[Hectorsvt]

View attachment 75131
Well finally got the lift and tires installed- RC 3" with the rear blistein 5100's as well...stock FX4 wheels and 285/75/18 Ridge grapplers

Update on my RC 3/2 lift kit....long story short my wife is 4 months pregnant did NOT like the way it rode (stiff) so I took the front R/C struts and went with the ICON 2.5's and man what a difference like day and night!, shocks are set at the lowest settings and drives so much smoother. Will post pics soon

 

[darkmatter]

Update on my RC 3/2 lift kit....long story short my wife is 4 months pregnant did NOT like the way it rode (stiff) so I took the front R/C struts and went with the ICON 2.5's and man what a difference like day and night!, shocks are set at the lowest settings and drives so much smoother. Will post pics soon

I agree with your wife. Way over sprung. Interested to see the pics. Did you retain the RC UCA?

 

[Hectorsvt]

I agree with your wife. Way over sprung. Interested to see the pics. Did you retain the RC UCA?

Yes I kept the UCA'S... will post when all this west texas rain / wind clears up lol

 

[Hectorsvt]

Little bit of some OG svt lightning in the back ground lol

 

[Dirtwrx816]

21 stealth, Bilstein f150 4x4 front, expy Bilstein rear. 295r70x18 recon grappler moto metal 18x9 +20 offset

 

[klyval_m]

Did you lift your timberline? What lift kit you used?