brettrandomart
Member
But there is current going from the small wire
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
No crank no start
- Thread starter brettrandomart
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1955moose
Full Access Members
- Joined
- Nov 23, 2014
- Posts
- 5,981
- Reaction score
- 1,338
Sorry didn't know. We get so many here that pump us for info, then end up taking to a mechanic before even trying. If that small push on wire is getting voltage when you turn key to start, your ignition switch is good. Next step is to check solenoid on firewall itself. Their are test procedures online. You will need a basic volt/ohmmeter to do test. Are their any cracks on solenoid? Hope it warms up for you. Don't know how you guys live in that cold.
Sent from my N9131 using Tapatalk
Sent from my N9131 using Tapatalk
stamp11127
Full Access Members
1) This is the first time you have stated anything about testing the wire.
2) You need to measure voltage on that wire, not current which is amps.
3) Also measure the battery voltage on the battery posts.
2) You need to measure voltage on that wire, not current which is amps.
3) Also measure the battery voltage on the battery posts.
