P0345 and P0349 after phaser replacement

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rolla91

New Member
Joined
Mar 19, 2023
Posts
2
Reaction score
0
Location
United States
My 2007 expedition already had lockouts installed and a tune, the phasers actually started wearing out internally and rattling even with the lockouts so I had new phasers with new lockouts installed. Afterwards I'm getting code P0345 & P0349. It runs fine above idle and doesn't even set a CEL, but idle is rough and throws a code as soon as it idles.

The connector seems fine to the cam sensor on that bank, I swapped the cam sensors to opposite sides after testing them but no change, issue is still bank 2.

I would appreciate any help or advice on what to check next. We're at a loss and don't really know where to move forward.

Thank you!
 
OP
OP
R

rolla91

New Member
Joined
Mar 19, 2023
Posts
2
Reaction score
0
Location
United States
It also had all of these codes after the job but they haven't come back after reset and a bit of normal driving.

Screenshot_20230314-145144~3.png
 

Attachments

  • Screenshot_20230314-145144~2.png
    Screenshot_20230314-145144~2.png
    166.9 KB · Views: 1

Latest posts

Members online

Forum statistics

Threads
53,396
Posts
500,653
Members
46,813
Latest member
max357
Top