Trim for the trailer hitch 2024 Expedition XLT
- Thread starter airbrush
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Andy B
Full Access Members
I want this too, but looking at the hitch it will be a challenge. By the time you leave the opening big enough for everything, there's not a lot left.
* Draw bar
* Access to the draw bar retaining pin
* Electrical connectors
* Safety chain connectors
But if somebody made such a trim piece I would be first in line.
* Draw bar
* Access to the draw bar retaining pin
* Electrical connectors
* Safety chain connectors
But if somebody made such a trim piece I would be first in line.
SilverStealth
Well-Known Member
This is the thread you're looking for:
www.expeditionforum.com
Hitch cover replacement
Does anyone know if there is a readily available trim ring to dress up the awful hole left in the bumper for the receiver hitch? The cover was a pain in the a$$ to get off, and I ‘d rather leave the hitch installed if I can find a chrome or paintable piece to cover the ugly edges of the bumper...
www.expeditionforum.com
bobward757
Well-Known Member
The stock hitch cover on the ‘24 is hideous and such a poor design. Lining up all those tabs perfectly is impossible.
