Recent content by Lrndthehardway
-
L
Replacing tranny cooler lines
Well thats not real inspiring lol. The only thing I can say is I already have the lines here, and the reviews on them had a couple that mentioned my exact truck so Im hoping for the best, still expecting the worst- Lrndthehardway
- Post #8
- Forum: 1st Gen - 1997 - 2002
-
L
Replacing tranny cooler lines
Because it looks like I have another seeping leak where they run next to the tranny on the drivers side, not sure which one. I know as soon as I cut the bad spot Ill have wiggled them enough to cause another leak, they look to be in pretty bad shape. Front leak is right on the bend under the...- Lrndthehardway
- Post #6
- Forum: 1st Gen - 1997 - 2002
-
L
Replacing tranny cooler lines
Thats my main problem, its outside, on a mud/gravel/snowy driveway, and its 27 degrees here, and windy lol. I dont wanna be under there guessing on how Im going to be getting the shield out of the way if I can help it, but it looks like Ill be doing what I figured and just bending it out of the...- Lrndthehardway
- Post #4
- Forum: 1st Gen - 1997 - 2002
-
L
Replacing tranny cooler lines
I cant believe noone knows the answer to this, or has had to get to these fittings before- Lrndthehardway
- Post #2
- Forum: 1st Gen - 1997 - 2002
-
L
Replacing tranny cooler lines
Looking for any tips on replacing the tranny cooler line fittings at the tranny, specifically, how the heck to get to them. Its a 98 EB 4x4. Does the heat shield for cat come off?- Lrndthehardway
- Thread
- Replies: 17
- Forum: 1st Gen - 1997 - 2002
-
L
Vacuum disconnect lines
I know which color does what, does anyone know what nipple they go on though? Like, I "think" the pink line goes on the nipple closest to the carrier right? 98 Expedition EB. Thanks!- Lrndthehardway
- Thread
- Replies: 0
- Forum: 1st Gen - 1997 - 2002
-
L
AWD into a 98 4x4?
Haha right on! Im thinking about just taking out the gears, dropping the front driveshaft and throwing it in. Were moving to florida at the end of July, dont really think Ill need the 4wd down there, only real reason I wanted it was so when the end of this things life rolls around I can take it...- Lrndthehardway
- Post #3
- Forum: 1st Gen - 1997 - 2002
-
L
AWD into a 98 4x4?
So my rear end was shot in my 98 EB, a friend had an 01 XLT that he was scrapping so I took the front and rear differentials, swapped out the rear last fall, and since now I need bearings and a half shaft I decided to tackle putting in the front dif. Only swapping because the new rear has 3.55s...- Lrndthehardway
- Thread
- Replies: 3
- Forum: 1st Gen - 1997 - 2002
-
L
Anyone know track bar/trailing arm bolt sizes?
98 Expedition EB passenger side rear track bar bolt is missing, and the right side lower trailing arm bolt nut is missing, and the bolts halfway out. I cant find this info anywhere. Thanks- Lrndthehardway
- Thread
- Replies: 1
- Forum: 1st Gen - 1997 - 2002
-
L
98 to 01 Axle swap ?s
So I swapped out the rearend in my 98 EB for one from an 01 XLT. Mine had 3.73s so Im swapping the front dif as well. I found out the lugs were different when I went to put the tires on the truck after the rear swap. So now Im thinking Id like to keep everything the same instead of the lugs...- Lrndthehardway
- Thread
- Replies: 0
- Forum: 1st Gen - 1997 - 2002
