Recent content by Rosin

  1. R

    Anybody in the Dallas area need a repair manual?

    It's the Haynes repair manual.
  2. R

    Anybody in the Dallas area need a repair manual?

    I bought a repair manual for 1st-gen Expeditions, and since I sold the Expedition, I don't need the manual anymore. It's in decent condition; a little dirty, but usable. I have some brake pads too. Can't remember if they're front, rear, or both, and the backing plates are probably rusty, but...
  3. R

    1998 expedition laser red Eddie Bauer parting out

    How much for the liftgate latch cable, front passenger window motor, and front driver wheel speed sensor, shipped to Brenham, Texas? I know these parts are all kind of difficult to get to; sorry.
  4. R

    Codes P0113/P0102

    I guess the most likely culprit is the MAF sensor. See if you can find a way to test it. If your ECM doesn't know how much air is getting into the engine, it doesn't know how much fuel to inject for an ideal mixture.
  5. R

    Official Texas Check-In

    Rosin signing in from Brenham, Texas.
  6. R

    Parting out 98 XLT in South Central Pennsylvania EXPY IS GONE

    I need the rear liftgate latch cable, the rear windshield wiper motor, and the front left ABS wheel speed sensor. Do you have those parts?
  7. R

    what price did you pay for your expy?

    I bought my '99 XLT for $2,500 in June of 2012. It has the 4.6L engine, leather seats, third row, and 6 CD changer. When I bought it, it had new tires, the SEL was on, and it had apparently been in some kind of minor accident; some repair work had been done on the left rear fender. It also had...
  8. R

    Abs issue

    OK, you're right; that has nothing to do with your ABS. It's kind of lame that you have to buy a different machine to read ABS and transmission codes.
  9. R

    Abs issue

    You might try it anyway. I took mine to AutoZone, and they said they couldn't read ABS codes. But later I went back because I had some engine codes, and they picked up the ABS code too.
  10. R

    Heater Core issue & hesitation

    Just checked today, and sure enough, I was low on coolant. I topped it off and haven't noticed the noise anymore.
  11. R

    Heater Core issue & hesitation

    A few days ago, I noticed the same noise, but just like y'all said, nothing is leaking. I'll check the coolant level just to be sure. I replaced my own heater core last winter; that was not fun at all. It took two days, and I had about thirty left-over screws. I'll post back if the coolant level...
  12. R

    Couple code's..

    Lane24 has it right. On my '99 4.6, the PCV hose completely rotted out, causing my engine to idle roughly and occasionally stall out when stopped. It did, however, cause a "System too lean" code. If you're getting a trouble code without any actual trouble, to me that seems like a problem with...
  13. R

    Finally got the "Service Engine Soon" light to go off

    Wow, sounds like I'm not the only one to experience this problem. I guess it's pretty unique to the '99 4.6L; we seem to be the only ones posting about it.
  14. R

    Finally got the "Service Engine Soon" light to go off

    I've had my 99 Expedition for a little over a year now, and for most of that year, I've been trying to figure out why the SEL was on. I just wanted to share what I did in hopes that it might help someone else. Skip to the end if you just want the short version (marked with an *). My truck has...
  15. R

    Abs issue

    I'm experiencing the same issue, but I think I know what I need to do to fix it. It started after I removed the front left wheel shroud to access the EGR tube so I could clean it out. When I removed the shroud, I think I damaged the cable for the wheel speed sensor. My hypothesis was supported...
See more

Latest posts

Members online

Total: 1,274 (members: 24, guests: 1,250)

Forum statistics

Threads
53,609
Posts
502,429
Members
47,207
Latest member
Thundertheloaf

Share this page

Top