99 5.4L o2sensors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CCTD shop

New Member
Joined
Mar 3, 2017
Posts
3
Reaction score
0
Location
Crescent city California
Hey everyone, I'm new here but have been the field for a lot of years, 1999 expedition 5.4L, three months ago I replaced all the coils and tuned up, then I replaced all four of the o2 sensors a month, now I have codes po151 and p1151. Has anyone had problems with wiring issues on o2 sensors ?
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,641
Reaction score
652
Location
Elizebethtown, PA
Trace out your wiring to the sensors Pay attention to any wires that are close to the exhaust manifolds and look for any burnt wiring

Check all connectors for any signs of corrosion and make sure connectors are clean and tight
 

docraymund

Full Access Members
Joined
Feb 14, 2011
Posts
1,075
Reaction score
108
Location
philippines
Check for intermittent breaks from the sensor to the ecu. It is very probable that you have a wiring issue.
 
Top