reviewing my previous posts, I missed a few additional lines that you'll need to modify.
726-26-02 | xxxx | **** | xxxx | Frequency Select Cfg: 0=Type 0 (LED), 1=Type 1 (Halogen), 2=Type 2, 3=Type 3 |
726-26-02 | xxxx | xxxx | x*xx | Outage Headlamps Cfg: 0=none, 1=both, 2=high, 3=low |
726-27-01 | 0000 | xxxx | xxxx | Front Light Outage Detection Disable when adding aftermarket LEDs/HIDs in Halogen Bucket |
726-27-02 | x*xx | xxxx | xxxx | ABM outage cfg: 1=outage, 0=no outage |
726-27-02 | **** | xxxx | xxxx | Low Beam outage cfg: 1=outage, 0=no outage |
Sorry for the newb question, but if I install LEDs in halogen projectors, I need to edit all of those lines (I’m seeing 3 different lines) to look like:
726-26-02. Xxxx 0000 X0xx (changes in 2 last sets)
726-27-01. 0000 xxxx xxxx
726-27-02. 0000 xxxx xxxx
Am i understanding this correctly? I haven’t received the dongle for forscan yet, amd never have used it before.
thanks for any help.