Old housings were yellowing and look dated. They don't look as bad in these pictures as they do in person.
In this picture the light seems bright but it's not. Night driving is not fun.
Open the hood and look for these tabs
They pull up about an inch to release the alignment pins. You may have to push towards the firewall a bit as you pull up. There is a locking tang to keep them from coming up on their own. My passenger side slid right up, but I had to push the drivers side tab back while pulling up.
This is how they look when lifted up.
Once released the headlight housing slides out quite easily.
In this picture the light seems bright but it's not. Night driving is not fun.
Open the hood and look for these tabs
They pull up about an inch to release the alignment pins. You may have to push towards the firewall a bit as you pull up. There is a locking tang to keep them from coming up on their own. My passenger side slid right up, but I had to push the drivers side tab back while pulling up.
This is how they look when lifted up.
Once released the headlight housing slides out quite easily.
Last edited: