Code P0720

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Jan 8, 2015
Posts
14
Reaction score
1
Location
Oregon
Ok i just bought my 2000 Expy and am already having problems...it is turning off Overdrive by itself, speedometer is bouncing all over the place...intermetintally, shifting really hard, and cruise control is not working when it is acting up. Code is coming up as P0720, Output Shaft Speed sensor but gives a bunch of options on a fix, any ideas would help.
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,641
Reaction score
652
Location
Elizebethtown, PA
DTC
P0720 - Insufficient input from Output Shaft Speed sensor

Description
The output shaft speed sensor inputs a signal to the PCM, based on the speed of the output shaft of the transmission. The PCM compares this signal with the signal of the VSS or TCSS and determines correct tire size and axle gear ratio.

Possible Causes
OSS sensor circuit short to GND
OSS sensor circuit short to PWR
OSS sensor circuit open
Damaged OSS sensor
Damaged PCM

Diagnostic Aides
Verify sensor signal output varies with vehicle speed.
 

Attachments

  • 030-003.gif
    030-003.gif
    22.3 KB · Views: 79
Top