whtbronco
Latest activity Postings About
-
-
whtbronco replied to the thread It seems the engineer could have made it easier.That's what happens to quite a few of them it appears. Here's a link to a new OEM intake... -
whtbronco replied to the thread Engine Studder, No Codes.What he said. LubeGard Shudder Fix seems to have a pretty good reputation and might be a good option to help isolate the issue. I...
-
450000... awesome.
-
whtbronco replied to the thread Not so Good Vibrations.7L1Z-4B425-A is the bushing for the torque arm(8L1Z-4612-A). I'm not sure the bushing would fit the factory arm, but I am fairly...
-
whtbronco replied to the thread Not so Good Vibrations.I found a thread where Hamfisted suggested part # 8L1Z-4612-A for a 2006. High probability that's correct, Mike always seems to be on...
-
whtbronco replied to the thread Not so Good Vibrations.The transfer case has been swapped again. I have not yet been for a test drive, probably be tomorrow. Before the swap I spent some...
-
whtbronco replied to the thread I am new here! Headlight/Grill question.Congrats on the Expedition with 64k miles. There's not a lot of aftermarket options for these trucks and even fewer still in...
-
whtbronco replied to the thread Short Circuit?.I would scan it first, always a good place to start. That said it's common for 2003 and 2004 models to have the fuel pump relay...
-
whtbronco replied to the thread Not so Good Vibrations.Not sure what I was thinking the other day when I noted that the vibration was present to 80mph, maybe it should have been 70mph...
-
whtbronco replied to the thread Engine fail safe light.There are numerous potential causes of the Check Engine light coming on and the engine dying. Fuel pump, fuel pump relay, poor ground...
-
whtbronco replied to the thread Intermittent electrical issues.Poor battery connections can cause some strange issues on these computer controlled vehicles. I hope you found the culprit.
-
whtbronco reacted to BigRed2004's post in the thread It seems the engineer could have made it easier with
Like.
I replaced the original intake manifold on my ‘03 5.4 because of a coolant leak at the crossover tube. I had used the Dorman unit. The... -
whtbronco replied to the thread Engine swap.What engine would be more reliable that would be a reasonably easy swap? Now if you're talking about going old school like a 351W or...
-
whtbronco replied to the thread New to me 04 NXB --questions.This thread has some good info. https://www.expeditionforum.com/threads/what-to-look-for-when-buying-a-gen-2-expy.10742/ I have no help...
-
whtbronco replied to the thread Idiot Light.....? Update 15 Apr 2024.I'm thinking maybe you need to test the oil pressure sensor. It's pretty easy to do, it's a single wire sensor and the article below...
-
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
-
2019 Ford Expedition Max Limited Overall Reliability and Quirks- Latest: Going_Going_Gone