Recent content by kramerpage

  1. kramerpage

    P0182 code 2006 5.4L

    Thank you guys. I have one ordered. The code was there for several days and I cleared the code several times. Then one day it never came back. I went thru the wiring harness and cleaned plug. Thought maybe mice chewed on wires.
  2. kramerpage

    P0182 code 2006 5.4L

    Can anyone help apply this to the Expedition. Had codes the reset. Came back. Reset and took a spirited drive and they have not returned for 100 miles.. I dont know whats going on here. Truck runs fine...
  3. kramerpage

    Door sensor data error- VSM issues?

    Good luck. Hope that solves this mess. Keep us informed. Sent from my SAMSUNG-SM-G930A using Tapatalk
  4. kramerpage

    Door sensor data error- VSM issues?

    I had that going on and found the rear wiper motor was on all the time. Took me months to figure it out. Open tailgate and place your hand on the plastic trim behind wiper. You can feel the heat of the motor if that's the issue. Good luck. Sent from my SAMSUNG-SM-G930A using Tapatalk
  5. kramerpage

    Exhausted from repairs

    After just repairing the rotten radiator core support now the passenger side exhaust manifold is leaking. Shop said 10 hours 2K to repair. GeeeWhizzz Will phasers fail next? The sky really is falling... Thanks Ford! Sent from my SAMSUNG-SM-G930A using Tapatalk
  6. kramerpage

    Fading break pedal

    Thanks. I checked vacuum, booster and MC seal when I removed master cylinder. Pedal hard when vacuum hose disconnected. Sent from my SAMSUNG-SM-G930A using Tapatalk
  7. kramerpage

    Fading break pedal

    Thanks for the insight...Love to be SCOLDED like a child. Geee Thanks I have an appointment august 5th . I would like to attempt the repair myself if its the MC but I dont throw parts at vehicles so I posted here. Schmidts went down hill after the owner died and his lazy son took over over 12...
  8. kramerpage

    Fading break pedal

    I drove the vehicle today and it stops fine. when I went to park and applied brake and placed in park the pedal went to the floor. Any Ideas? Brake fluid level has not moved. Could it be air in abs unit from installing new lines? Can I disconnect master cylinder lines and place a threaded plug...
  9. kramerpage

    Fading break pedal

    I drove it over 1000 miles with out issue. I don't believe I could pin it on his work or not. Hence I bleed the brakes thinking maybe he missed something. Sent from my SAMSUNG-SM-G930A using Tapatalk
  10. kramerpage

    Fading break pedal

    While backing out of the driveway this morning the brake pedal went completely to the floor. It kind of scared me because I wasn't ready for it and I haven't had coffee yet. I recently had new brake lines installed from the output of the ABS to all four wheels and also installed for new rubber...
  11. kramerpage

    Should it stay or should it go?

    Well I finally got the core support installed. It came out wonderful. Condenser, radiator,power steering cooler and transmission cooler were all left in place. Slightly suspended in air to slip out old and slide in new. Not many body repair guys left that can even pull that off. He charged 700...
  12. kramerpage

    High pitched noise from brake peddle

    How about the break pedal height adjustment motor? Could it be trying to adjust and gear is stripped out? That's what mine did but I didn't get a squeal. Sent from my SAMSUNG-SM-G930A using Tapatalk
  13. kramerpage

    Should it stay or should it go?

    Every night I spray brake cleaner and transmission fluid into the rusted fitting. I have used a dental pick and the rust just keeps coming. I now have it so the plastic removal tool enters the fitting the proper distance but cannot get the line to release. I can now rotate the line within the...
  14. kramerpage

    2 new sounds (1. Engine bay and 2. Front Blower)

    Is it the blower motor bearings? Idk Sent from my SAMSUNG-SM-G930A using Tapatalk
  15. kramerpage

    Should it stay or should it go?

    I cannot get the lower transmission line loose from the radiator. It's so rusted the tube and fitting must be full of rust. No fittings available so you have to replace radiator. Unbelievable... I went ahead and replaced water pump tensioner belt and pulleys. Sent from my SAMSUNG-SM-G930A...
See more

Latest posts

Staff online

Members online

Total: 1,698 (members: 34, guests: 1,664)

Forum statistics

Threads
53,588
Posts
502,242
Members
47,173
Latest member
johnR6824

Share this page

Top